User's Manual

Table Of Contents

NOTE

The AP8130DN offers two internal DB9 ports, which have similar functions as external GE ports. In device

usage, you are advised to connect the device through the GE ports but not the DB9 ports.

CAUTION

There is a scald warning label attached on the device, warning you not to touch the device after

the device has been operating for a long time.

1.2 Indicator Description

The AP8030DN and AP8130DN provides multiple indicators: SYS indicator, Link/ACT

indicator, and Wireless indicator. The following tables describe indicators on the AP8030DN

and AP8130DN.

NOTE

l Indicator colors may vary slightly at different temperature.

l After a Fit AP is powered on, you can run the led off command on the AC to turn off all AP indicators.

To restore the indicators to normal working status, run the led on command. Indicators on a Fat AP

cannot be turned off using the led off command.

GE1

SYS

Link/A CT1

Wire less1

Link/A CT0

Wire less0

Link/A CT2

SYS indicator

Table 1-2 Descriptions about the SYS indicator

Type Color Status Description

Default

status after

power-on

Green Steady on The AP is just powered on and the software is not

started yet.

Software

startup

status

Green Steady on

after

blinking

once

After the system is reset and starts uploading the

software, the indicator blinks green once. Until the

software is uploaded and started, the indicator

remains steady green.

Huawei AP8030DN & AP8130DN

Hardware Installation and Maintenance Guide 1 AP8130DN & AP8030DN Overview

Issue 03 (2015-05-18) Huawei Proprietary and Confidential