User's Manual

Table Of Contents

l To adjust the vertical angle of the AP, use the M6 hex key to loosen the screw at position

1, install the AP, and adjust the vertical angle with the weight of the AP.

7. Hang the AP with the AP-side mounting bracket module to the wall-side mounting bracket

module and tighten the screws to secure the AP.

Installing an AP8130DN

1. Fix the mounting bracket to the wall, adjust the installation position, and use the marker to

mark the drilling positions where expansion bolts are installed, as shown in the following

figure.

Huawei AP8030DN & AP8130DN

Hardware Installation and Maintenance Guide 2 AP Installation

Issue 03 (2015-05-18) Huawei Proprietary and Confidential