User's Manual

Table Of Contents

2.5.2 Pole Mounting

An outdoor AP must be installed on a pole with a diameter of 48 mm to 114 mm and the thickness

must be at least 2.5 mm. The AP8030DN installation requires use of the angle adjusting

component but the AP8130DN does not.

l Installing an AP8030DN

l Installing an AP8130DN

Installing an AP8030DN

1. Determine the AP installation position and attach the mounting bracket on the pole using

the hose clamp.

a. Use the M6 hex torque screwdriver to loosen screws on the hose clamp and lift the

lid.

b. Slide the hose clamp through the hole of the mounting bracket, attach it to the pole,

and close the hose clamp.

c. Close the lid.

d. Use the hex torque screwdriver to tighten the screws with a torque of 5 N•m.

Huawei AP8030DN & AP8130DN

Hardware Installation and Maintenance Guide

2 AP Installation

Issue 03 (2015-05-18) Huawei Proprietary and Confidential