User's Manual

Table Of Contents

NOTE

The screw at position 4 does not need to be loosened.

l To adjust the horizontal angle of the AP, use the M6 hex key to remove the screw at

position 2, lift the angle adjusting component vertically, and adjust the angle adjusting

component horizontally.

l To adjust the vertical angle of the AP, use the M6 hex key to loosen the screw at position

1, install the AP, and adjust the vertical angle with the weight of the AP.

4. Hang the AP with the AP-side mounting bracket module to the wall-side mounting bracket

module and tighten the screws to secure the AP.

Huawei AP8030DN & AP8130DN

Hardware Installation and Maintenance Guide 2 AP Installation

Issue 03 (2015-05-18) Huawei Proprietary and Confidential