User's Manual

Table Of Contents

Figure 2-7 Removing the waterproof block

3. Assemble the connector on the optical fiber.

a. Assemble the external connector shell and support, as shown in the following figure.

Figure 2-8 Assembling the connector (1)

b. Put the rubber ring on the optical fiber and insert it into the support in compliance

with the direction indicated on the ring, as shown in the following figure.

Figure 2-9 Assembling the connector (2)

NOTE

Ensure that the arrow on the rubber ring points to the support.

4. Remove the sealing cover of the optical fiber port on the device and insert the optical fiber

into the port. Turn the support to find the correct optical fiber installation slot and push the

support forward (together with the rubber ring) until the optical fiber is installed to the

Huawei AP8030DN & AP8130DN

Hardware Installation and Maintenance Guide

2 AP Installation

Issue 03 (2015-05-18) Huawei Proprietary and Confidential