User's Manual

Table Of Contents

correct position. Rotate the external connector shell clockwise until the red ring is not

visible, as shown in the following figure.

Figure 2-10 Connecting optical fibers

NOTICE

l Connect the optical fiber correctly; otherwise, the optical fiber may be damaged.

l Bundle the optical fibers with binding tapes every 1 m.

Connecting network cables

1. Use a shielded straight-through cable. Cut the cable into a proper length based on the

distance between the AP and the PSE device, strip the cables on both ends, and crimp the

wires into RJ45 connectors.

2. Make a network cable onsite according to pin assignment in Table 2-3. Otherwise, the

communication quality is affected even if devices can be connected.

Table 2-3 Pin assignment

X1 Pin Wire Color X2 Pin

1 White and orange 1

2 Orange 2

3 White and green 3

4 Blue 4

5 White and blue 5

6 Green 6

Huawei AP8030DN & AP8130DN

Hardware Installation and Maintenance Guide 2 AP Installation

Issue 03 (2015-05-18) Huawei Proprietary and Confidential