User's Manual

Table Of Contents

1. Determine the position for installing the ground clip on the cable based on the actual cable

route.

2. Use a utility knife to strip the sheath off the network cable for about 32 mm (1.26in.) to

expose the shield layer.

NOTICE

Do not damage the shield layer when stripping the sheath off the cable.

3. Install the ground clip on the shield layer of the cable, and then use a screwdriver to tighten

the screws on the ground clip.

(1) Ground cable

(2) Ground clip (3) Network cable

4. Wrap three layers of waterproof tape and three layers of polyvinyl chloride (PVC) insulation

tape at the ground clip.

Huawei AP8030DN & AP8130DN

Hardware Installation and Maintenance Guide

2 AP Installation

Issue 03 (2015-05-18) Huawei Proprietary and Confidential