User's Manual

Table Of Contents

----End

Assembling the Cord End Terminal and the Power Cable

Context

Figure 5-11 shows the components of a cord end terminal and a power cable.

Figure 5-11 Components of a cord end terminal and a power cable

A. Cord end terminal

B. Insulation layer of a power cable C. Conductor of a power cable

Procedure

Step 1 Based on the cross-sectional area of the cable conductor, strip a part of the insulation. The L1-

long conductor is exposed, as shown in Figure 5-12. The recommended values of L1 are listed

in Table 5-3.

NOTICE

When you strip a power cable, do not damage the conductor of the cable.

Figure 5-12 Stripping a power cable (cord end terminal)

Huawei AP8030DN & AP8130DN

Hardware Installation and Maintenance Guide 5 Appendix

Issue 03 (2015-05-18) Huawei Proprietary and Confidential