User's Manual

Table Of Contents

Matching Pins of Wires Wire Color

8 Brown

Step 7 Cut off the surplus cables along the lower edge of the wire holder, as shown in Figure 5-24.

Figure 5-24 Cutting off surplus cables

Step 8 Put the connector body onto the wire holder and turn the metal shell by 90°, as shown in Figure

5-25.

NOTE

Ensure that the wire holder is in good contact with the connector body.

Figure 5-25 Put the connector body onto the wire holder

Step 9 Push the metal shell towards the connector body until the wire holder and the connector body

are engaged completely. Crimp the connector, as shown in Figure 5-26.

Huawei AP8030DN & AP8130DN

Hardware Installation and Maintenance Guide

5 Appendix

Issue 03 (2015-05-18) Huawei Proprietary and Confidential