User's Manual

Table Of Contents

Step 2 Hold an RJ45 connector and turn it 45°. Observe the top edges of the metal contact strips. Figure

5-34 shows an unqualified piece.

Figure 5-34 Unparallel contact strips of different heights

Step 3 Check whether the contact strips are clean. If they are not clean and the dirt cannot be removed,

replace it with a new RJ45 connector. Figure 5-35 shows an unqualified piece.

Figure 5-35 Dirt on a contract strip

Step 4 Check whether the contact strips and the plastic separators are well aligned and intact. If a

separator is skew and cannot be fixed, replace it with a new RJ45 connector. Figure 5-36 shows

an unqualified piece.

Figure 5-36 Skew plastic separators

Huawei AP8030DN & AP8130DN

Hardware Installation and Maintenance Guide 5 Appendix

Issue 03 (2015-05-18) Huawei Proprietary and Confidential