User's Manual

Table Of Contents

Figure 5-71 Disassembling an MPO fiber connector

----End

5.1.5 Replacing the Mold of the Crimping Pliers

Procedure

Step 1 Hold the handles of a pair of COAX crimping tools. Loosen the two fastening screws in the

counterclockwise direction, as shown in Figure 5-72.

Figure 5-72 Loosening two fastening screws

Step 2 Hold the handles of the COAX crimping tools to open the self-locking mechanism. The jaw of

the COAX crimping tools opens automatically, as shown in Figure 5-73.

Huawei AP8030DN & AP8130DN

Hardware Installation and Maintenance Guide

5 Appendix

Issue 03 (2015-05-18) Huawei Proprietary and Confidential