Users Manual
Table Of Contents
- 1 Product overview
- 2 Setup
- 3 Connecting to your router's Wi-Fi network
- 4 Configuring your router
- 5 Optional configurations
- 6 Additional information
- 7 FAQs
- 8 Troubleshooting
- Why is the indicator red after I have finished configuring the router?
- Why is the indicator status steady on cyan, blue, or yellow, but the indicator is off?
- Why can't I access the router's web-based management page?
- 1. Ensure that your computer is connected to the router through an Ethernet cable or Wi-Fi.
- 2. Ensure that your computer is set to obtain an IP address and DNS server address automatically.
- 3. Restart your browser, or try using another browser.
- 4. If the problem persists, restore the router to its factory settings.
- 9 Safety information
- 10 Legal Notice
7
3. Accessing the Internet through an Ethernet port
You can connect the router to a wall-mounted Ethernet port using an
Ethernet cable to connect to the Internet when you have used up your
data allowance.
Configure the relevant settings on the web-based management page
before connecting to the Internet through an Ethernet port. More
information can be found in the help section of the web-based
management page.
华为信息资产
仅供CTC使用
严禁扩散