P10 Quick Start Guide
Your device at a glance Before you start, let's take a look at your new device. • To power on your device, press and hold the power button until the screen turns on. • To power off your device, press and hold the power button, and then touch *[GR RKTY IGSKXG . 3OIXUVNUTK +GXVOKIK 9ZGZ[Y OTJOIGZUX ,RGYN ,OTMKXVXOTZ YIGTTKX
Getting Started Follow the instructions in the following figures to set up your device. NJ DSP 4% BAC-L03 NJ DSP 4% Or BAC-L23 • Do not insert or remove the SIM card when your device is powered on. • Ensure that the card is correctly aligned and that the card tray is level when you insert it into your device. Be careful not to scratch your device or hurt yourself when using the eject pin.
the reach of children to prevent accidental swallowing or injury. Do not use cut or modified SIM or microSD cards Caution with your device as these may not be recognized and could damage the card tray.
Dual card dual standby single pass This description should only be used in conjunction with the BAC-L23. Your device supports only dual card dual standby single pass, which means you cannot use both SIM cards for calls or data services simultaneously. • When you are on a call using SIM card 1, SIM card 2 cannot be used to make or answer calls.
For more information If you encounter any problems while using your device, you can obtain help from the following resources: Log on to the official Huawei website. You can: • Visit http://consumer.huawei.com/en/ to download user guides, view frequently asked questions and other information. • Visit http://consumer.huawei.com/en/support/ hotline for the most up-to-date contact information for your country or region.
Safety Information Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly. Operation and safety • To prevent possible hearing damage, do not listen at high volume levels for long periods. • Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards.
• Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving. • While flying in an aircraft or immediately before boarding, only use your device according to instructions provided. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal.
Disposal and recycling information The crossed-out wheeled-bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the normal waste stream with household garbage.
certain hazardous substances in electrical and electronic equipment, such as EU REACH, RoHS and Batteries (where included) regulations, etc. For declarations of conformity about REACH and RoHS, please visit our web site http://consumer.huawei.com/certification. FCC Regulatory Compliance Body worn operation The device complies with RF specifications when used near your ear or at a distance of 1.50 cm from your body.
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Legal Notice Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Android™ is a trademark of Google Inc. LTE is a trademark of ETSI. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license. Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance.
Note: Remember the Google account your phone last logged in to. During an untrusted factory settings restoration or microSD card–based update, Google's anti-theft mechanism requires you to enter the Google account your phone last logged in to on the startup navigation screen for identity authentication. Your phone can properly power on only after the identity authentication passes. Please visit http://consumer.huawei.