User Manual

Installing the UIM Card and Battery

Consult the network operator if a UIM card is needed.

Make sure that the golden area on the UIM card is facing downwards

and the cut-off edge is correctly aligned with the card holder.

Removing the Battery and UIM Card

Charging the Battery

1. Connect the charger to the charger interface at the bottom of your

phone. Make sure that the arrow on the charger connector faces

the front side of the phone.

2. Connect the charger to an AC power socket.

3. During the charging, the charging icon in the animated status is

displayed.

4. When the charging icon becomes statistic, the phone is fully

charged. Disconnect the charger from the AC power socket.

5. Press the gray buttons on both sides of the charger connector

inwards to disconnect the charger from the phone.