C2800 CDMA 1X Mobile Phone and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. The information in this document is subject to change without notice.
Your Phone Earpiece Screen Navigation Keys Left Soft Key Talk /Send Key Right Soft Key End /Power Key OK Key OK Number Keys Vibrate Only Key Keyguard Key Speaker Charger Interface /Data Cable Connector /Headset Jack Keys and Functions Press… To… z z z z z View the call log in the standby mode. Make or answer a call. Power on or off the phone (by pressing and holding it). End a call or reject an incoming call. Return to the home screen.
Press… To… z Display the Magic interface in the standby mode. z Confirm a selection. Select the option displayed on the lower left corner of the screen. Select the option displayed on the lower right corner of the screen. z Display the Profiles interface ( interface ( ), the Create Message interface (by pressing and holding ( ), the Messages ), the Scheduler interface ), and the Alarms interface ( ) in the standby mode.
Press… To… z z z z z z Enter the * symbol. Enable or disable the meeting profile (by pressing and holding it). Provide different functions according to the phone features being used. Enter the # symbol. Lock the keypad in the standby mode (by pressing and holding it). Provide different functions according to the phone features being used.
Menu Tree Messages 1 Create Message 2 Inbox 3 Outbox 4 Drafts 5 Voice Mail 6 Templates 7 Recipients List 8 My Folder 9 Settings 0 Delete All Call Histor Log y 1 All Calls 2 Missed Calls 3 Received Calls 4 Dialed Calls 5 Call Memo 6 Call Durati on Profiles Profiles 1 General 2 Silence 3 Meeting 4 Outdoor 5 My Profile 1 6 My Profile 2 Brew Tools 1 Recorder 2 Alarms 3 Schedulers 4 Calculator 5 Stopwatch 6 World Clock 7 Gallery Settings 1 Display Settings 2 Date & Ti me 3 Call Settings 4 Phone Settings 5 Sec
Installing the UIM Card and Battery Contact the network operator whether a UIM card is needed. Make sure that the golden area on the UIM card faces downwards and the cut-off edge is correctly aligned with the card holder. Removing the Battery and UIM Card Make sure that your phone is powered off. Charging the Battery 1. Connect the charger to the charger interface at the bottom of your phone. Make sure that the side labeled "TOP" of the charger faces the front side of the phone. 2.
4. Disconnect the charger from the AC power socket. 5. Press the gray buttons on both sides of the charger connector inwards to disconnect the charger from the phone. Using the Function Menu 1. In the standby mode, press 2. Press to display the Menu interface. to scroll to a menu item. 3. Press (Select) or to display the menu. 4. Do the following to display the submenu: ¾ Press to scroll to a submenu item and press to display the submenu.
Note z When the phone is locked, enter the lock code to unlock the phone first; otherwise, you can make only emergency calls or answer calls. z In the standby mode, press Select a record and press z Select a contact from the phonebook and press dial. to view the call log. to dial. to Answering a Call When there is an incoming call, press to reject it. to answer it, or press , (Answer), or z If the any key answer function is enabled, press any key (except or ) to answer an incoming call.
If you enter wrong PINs three times consecutively, the phone asks you to enter the PUK code. If you enter wrong PUKs ten times, the UIM card is invalidated permanently. Contact your service provider for a new card. Locking the Keypad In the standby mode, press and hold When the keypad is locked, press make emergency calls. to lock the keypad. to answer incoming calls or You can press and to unlock the keypad.
1. Press each desired key once corresponding to the sequence of the letters. Then the phone displays the commonly-used words according to the numeric sequence of key presses. 2. Press to scroll to the desired word. 3. Press to select the word. to enter the word and a space. Press Entering English (Abc/abc/ABC) In the "Abc" , "abc" or "ABC" input mode, press a key labeled with the desired letters once to enter the first letter on the key, twice to enter the second letter on the key, and so on.
Entering Symbols 1. In any input mode, press 2. Press to display a symbol list. to scroll to the desired symbol. 3. Press the numeric key to enter the symbol.
Warnings and Precautions Electronic Device z Power off your phone near high-precision electronic devices. The phone may affect the performance of these devices. z Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and other automatic-control devices. If you are using an electronic medical device, consult the device manufacturer to confirm whether the radio wave affects the operation of this device.
Traffic Safety z z Please observe local laws and regulations on phone use. Do not use your phone while driving to avoid traffic accident. Secure the phone on its holder. Do not place the phone on the seat or other places where it can get loose in a sudden stop or collision. z Use the phone after the vehicle stops at a safe place.
z Do not put your phone in the back pocket of your trousers or skirt, to avoid phone damage while seated. Children Safety z Put your phone, battery, and charger in places beyond the reach of children. Do not allow children to use the phone, battery, or charger without guidance. z Do not allow children to put the battery in mouth, for electrolyte in the battery is poisonous. z Do not allow children to touch the small fittings.
Clearing and Maintenance z z z z z z Before you clean or maintain the phone, power off the phone and disconnect it from the charger. Otherwise, electric shock or short-circuit of the battery or charger may occur. Do not use any chemical detergent, powder, or other chemical agent (such as alcohol and benzene) to clean the phone and the charge. Otherwise, part damage or a fire can be caused. You can clean the phone and the charger with a piece of soft antistatic cloth that is a little wet.
z Do not connect two poles of the battery with conductors such as cables, jewelries or any other metal material. Otherwise, the battery is short-circuited and it may burn your body. z Do not disassemble the battery or solder the battery poles. Otherwise fluid leakage, overheat, fire, or explosion may occur. z If there is battery leakage, smoke, or strange smell, stop using the battery and keep it away from open flame to avoid fire or explosion. Then turn to an authorized maintenance engineer for help.
z Use the AC power supply defined in the specifications of the charger. An improper power voltage can cause fire or malfunction of the charger. z Do not place any heavy object on the power cord of the charger. Do not damage, change, or pluck the power cord. Otherwise electric shock or fire may occur. z When you are charging the battery with the charger, do not touch the plug, power cord or the charger with a wet hand. Otherwise, electric shock can be caused.
body worn operation, this phone has been tested and meets FCC RF exposure guidelines when the handset is positioned a minimum of 15 mm from the body with an accessory that contains no metal part. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. The SAR limit adopted by the USA and Canada is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The highest SAR value reported to the FCC and IC for this device type when tested for use at the ear is 0.