Wonderful Communication, Mobile Life.
Copyright © 2007 Huawei Technologies Co., Ltd. All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and HUAWEI are trademarks of Huawei Technologies Co., Ltd. All other trademarks mentioned in this manual are the property of their respective holders. Notice The information in this manual is subject to change without notice.
Contents 1 Descriptions of the Mobile Partner GUI...............................................................................1 Launch the Mobile Partner ............................................................................................1 Interface Overview ........................................................................................................1 2 Internet Services....................................................................................................................
1 Descriptions of the Mobile Partner GUI Launch the Mobile Partner To launch the Mobile Partner, double-click the shortcut icon of the Mobile Partner on the desktop. Note: y If you are required to enter the Personal Identification Number (PIN) code, enter the correct one and click OK. If you fail to enter the correct PIN or PIN Unblocking Key (PUK) code, the network-related functions are unavailable. y Contact your service provider for whether a User Identity Module (UIM) card is needed.
Status Information The following table lists all the possible status information. Status Information Description Network signal Indicate the signal strength of the network by the following Network information Display the profile of the current network. New message If the Text message prompt is enabled, when there is a new message: icons: Unread message flashes. y In the status bar, the icon y On the lower right corner of the PC screen, the Prompt dialog box is displayed.
2 Internet Services Accessing the Internet After setting the network and connection profiles, you can access the network through the Mobile Partner. You can connect the network by one of the following options: 1. 2. 3. 4. . Click Select the correct profile in the drop-down arrow. Click Connect to set up the connection. Launch the browser on the PC to access the internet.
Note: The statistical data of the traffic is only for your reference. The actual traffic information is accounted on the basis of the traffic data collected by the operator. Resetting the Statistics Information You can operate as follows to reset the statistics information: 1. 2. 3. In the navigation tree, right-click a tab. Choose Reset Statistics. In the Confirm dialog box, click Yes.
3 Text Services The Mobile Partner provides Text services. The local mailbox can store the messages without capacity limitation and can be easily managed. Creating and Sending a Message 1. Click 2. 3. y y 4. 5. y y y Click to display the New interface. Enter the recipient number by one of the following options: Click Send To.... Then select a phone number in the Select Number interface. Enter the recipient number directly. Enter the message content.
Searching a Message Click . Then enter the name/phone number of the message sender, part of the message content or received time. Note: y You can enter part of the message content to search. y When you search the message, a list of the matched messages is updated automatically according to your entered information. The matched contacts in the searched group are displayed. None is displayed when no matched message can be searched. Viewing a Message You can view a message in the inbox as follows: 1. 2. 3.
Outbox Outbox stores the sent messages, including the messages sent both successfully and unsuccessfully. To display the Outbox interface, do as follows: 1. 2. to display the Text interface. Click Choose Local > Outbox to display the Outbox interface. Note: y For details, refer to "Inbox" on page 5. y To the group sending messages, you cannot call the message recipients. Important, Draft, Deleted and Reports Important stores your important messages. Draft stores the drafts of messages.
y If your terminal does not need a UIM card, you can save the sent and received messages in the terminal. The operations to the messages in the terminal are as same as those to the messages in the UIM card. You can move a message from the UIM card to the local inbox or local outbox. 1. 2. 3. 4. y y 5. to display the Text interface. Click Click the UIM tab. Select one or more contacts in the contact list and right-click.
Note: The Text message tone can be a *.wav or *.mid file. Setting the Text Message Priority You can set the text message priority, to label the message with their preferences. The text message priority includes such options as Normal, Urgent and Emergency. Requesting a Delivery Report You can select Request delivery report to enable the delivery report function. When the function is enabled, the network can deliver a status report of the sent message.
4 Phonebook You can manage contacts in the phonebook conveniently by the Mobile Partner. Phonebook Management in Local You can do as follows to enter the local phonebook: 1. 2. Click to display the Phonebook interface. Click Local in the navigation tree. Creating a Contact 1. 2. 3. Click to display the New Contact interface. Enter the information. Click OK to save the contact. Note: The contact information cannot be null or contain spaces or new-line characters only. Searching a Contact Click .
Viewing a Contact You can view a contact as follows: 1. 2. 3. y y y Enter the local phonebook, select a contact to view. Click the selected message. The contact name, mobile number, office number, home number, E-mail address and remarks are displayed below the contact list. Right-click the selected message, and you can do as follows: Edit Contact: Change the information of the contact. Delete Contact: Delete the contact. Send: Send a message or name card to the mobile number of the contact.
Adding a Contact You can add a contact from Local to another group as follows: 1. 2. Select one or more contacts in Local. Drag the selected contacts to another group. Note: When you drag the selected contact(s), if you press and hold Ctrl, the contact(s) can be copied to another group; otherwise, the contact(s) are moved to another group. You can add a contact to a group as follows: 1. Select a group in the navigation tree. 2. 3. ; or right-click in the contact list and choose New Contact.
Note: y Contact your service provider for whether a UIM card is needed. y The UIM card is supplied by the service provider. For details, contact your service provider. Import/Export Import/Export the Contacts from Local Phonebook You can export the contacts from Local to a *.csv file, and import the contacts from a *.csv file to phonebook in Local. Importing Contacts You can import the contacts from a *.csv file to the local phonebook. 1. 2. 3. 4. 5. 6. Click to display the Phonebook interface.
Import/Export the Contacts from the UIM Card (Optional) If a UIM card is used in your terminal, you can export the contacts from the UIM card to a *.csv file, and import the contacts from a *.csv file to phonebook in the UIM card. The operations on the contacts in the UIM card are similar to those on the contacts in Local. For details, refer to "Import/Export the Contacts from Local Phonebook" on page 13.
5 Settings and Information Query Switching a Language The Mobile Partner provides several interface languages for you. During the running of the software, you can choose Tools > Language to switch the languages. PIN Operations (Optional) If a UIM card is used in your terminal, the Personal Identity Number (PIN) code protects your card from unauthorized use. You can modify the PIN code and enable/disable the PIN verification.
Entering the PIN Code When the PIN verification is enabled, you need to enter the correct PIN code to use the network-related functions. 1. 2. 3. After the Mobile Partner is launched, the Enter PIN dialog box is prompted. Enter the correct PIN code. Click OK to complete the verification. Note: y If you enter wrong PIN codes for a preset number of times, the UIM card is locked and you cannot use it until you enter the PUK code.
Startup Settings You can set the Mobile Partner to launch automatically along with Windows and minimize the interface after the startup. 1. Choose Tools > Options. 2. Click General in the navigation tree. 3. You can choose the following options: y Select Launch on Windows startup: The Mobile Partner launches automatically along with Windows. y Select Minimize window on startup: The interface of the Mobile Partner is automatically minimized after the Mobile Partner is launched. 4.
2. 3. 4. 5. Click Advanced to set the IP information, authentication protocol, Domain Name Server (DNS) and Windows Internet Name Service (WINS). Click OK to save the advanced settings and return to the Dial-Up interface. Click OK and the Prompt dialog box is displayed. Click Yes to save the settings; or click No to cancel the settings. Editing a Dial-up Profile 1. 2. 3. 4. 5. 6. In the Profile Name drop-down combo box, select a setting.
6 FAQs What shall I do if I cannot access the Internet? 1. 2. 3. Check the network signal strength. Check whether you have activated the wireless online service. You can ask the local network operator on how to activate it. If the wireless online service is activated, check network settings according to the instructions in "Internet Services" on Page 3. Why only part of the pasted content can be displayed during the edit? When editing a message, at most 2048 characters can be entered.
7 Acronyms and Abbreviations Numerics 3G The Third Generation A APN Access Point Name C CDMA Code Division Multiple Access D DNS Domain Name Server E EVDO Evolution Data Optimization P PIN Personal Identification Number PUK PIN Unblocking Key U UIM User Identity Module W WINS Windows Internet Name Service 20
