User's Manual

10 2A. Installing and Startup
⽧ Removing or Installing the Back Cover (page 10)
⽧ Installing or Removing the Battery (page 10)
⽧ Installing or Removing a MicroSD
TM
card (optional) (page
7)
⽧ (page 11)
⽧ Turning Your Router On or Off (page 13)
⽧ Checking the status of the router via the screen (page 14)
Removing or Installing the Back
Cover
To remove the back cover, simply slide the cover down
(in the direction of the arrow in Figure A). You may
hear a click sound.
To install the back cover onto your router, place it on
the back of the router, then slide up (in the direction of
the arrow in Figure B). You may hear a pop sound.
Installing or Removing the Battery
To install the battery, gently insert the battery into the
battery slot on the back of the router, making sure the
connectors align, and gently press down to secure the
battery (as shown in Diagram A).
To remove the battery, make sure the power is off so
that you don’t lose any data, and then press the battery
release latch up (in the direction of the arrows in
Diagram B) and remove the battery from the router.
2A. Installing and Startup
WARNING: Do not handle a damaged or leaking Li-Ion
battery as you can be burned.
Figure A Figure B