User's Manual

2A. Installing and Startup 11
Setting Up Service
Installing or Removing a MicroSD
TM
card (optional)
Your router supports a microSD™ card (sold
separately) up to 32 GB for file sharing and transfer or
storage. When connected to a computer through the
usb cable, the microSD card is recognized as a
removable storage device.
To install a microSD
TM
card, gently insert the card into
the microSD
TM
card slot on the back of the router,
making sure the side with the metal contacts face to
the back of the router (as shown in Figure A).
To remove the microSD
TM
card, slightly push in on it to
release it, and then remove it from the router (as shown
in Figure B).
Charging the Battery
Sprint-approved or [manufacturer]-approved batteries
and accessories can be found at Sprint Stores or
WARNING: Before installing or removing a microSD
TM
card,
power off the router to protect the router and the
SD card from being damaged.
Diagram A Diagram B
WARNING: Using microSD cards larger than 32 GB may
cause data loss and damage your device.
WARNING: Use only Sprint-approved or [manufacturer]-
approved batteries and chargers with your router.
The failure to use a Sprint-approved or
[manufacturer]-approved battery and charger
may increase the risk that your router will
overheat, catch fire, or explode, resulting in
serious bodily injury, death, or property damage.
Figure A Figure B