User's Manual
Table Of Contents
- 1 Warnings and Precautions
- 2 Product Introduction
- 3 Hardware Installation
- 4 Configuration of Internet Access Parameters
- 5 Configuration of WLAN Parameters
- 6 Configuring Frequently Used Functions
- 6.1 Configuring Multiple Computers to Access the Internet Simultaneously
- 6.2 Enabling or Disabling the WLAN Function
- 6.3 Improving the Security of a WLAN
- 6.4 Controlling the Internet Access Rights of Computers
- 6.5 Prohibiting Computers from Accessing Specified Web Sites
- 6.6 Setting the Available Bandwidth of a Computer
- 6.7 Preventing Attacks on the Internet
- 6.8 Removing the Restriction Caused by the Binding of the Internet Access Account to the MAC Address
- 6.9 Allowing Internet Users to Access an Internal Resource Server
- 6.10 Expanding the Coverage of a WLAN
- Maintenance Guide
- 8 FAQs
- 9 Appendix
HG232f 300Mbps Wireless Router
User Guide
3 Hardware Installation
3-3
1. Power adapter of the router
2. Router
3. Desktop computer
4. Community broadband network interface on the wall (Ethernet interface)
3.3.2 Installing the Router on an ADSL Broadband Network
On the ADSL broadband network, the ADSL modem provides an Ethernet interface used
to connect a computer to the Internet.
Figure 3-2 Shows the cable connections of an ADSL broadband network after the router
is installed on the network
1. Power adapter of the router
2. Router
3. Power adapter of the ADSL modem
4. Desktop computer
5. ADSL modem
6. Telephone
7. Splitter
8. Telephone line interface on the wall