EchoLife HG8245 GPON Terminal Quick Start
EchoLife HG8245 GPON Terminal V100R002C06 Quick Start Issue 01 Date 2011-06-30 BOM number 31505131 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support. Please feel free to contact our local offices or headquarters. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Web site: http://www.huawei.com Tel: 0755-28560000 4008302118 Fax: 0755-28560111 Email: support@huawei.com Copyright © Huawei Technologies Co., Ltd. 2011.All rights reserved.
Safety Precautions To use the device properly and safely, read the safety precautions carefully before using the device and strictly observe these precautions when using the device. Basic Requirements � Keep the device dry when it is stored, transported, and used. � Prevent any violent collision when the device is stored, transported, and used. � Install the device in strict compliance with the requirements of the supplier. � Do not disassemble the device without permission.
Safety Precautions Instructions for Use � Use only the accessories delivered or recommended by the supplier, for example, the power adapter and battery. � The power supply voltage of the device must meet the requirements for the input voltage of the device. � Keep the power plug clean and dry to prevent electric shocks or any other hazard. � Dry your hands before connecting or disconnecting cables. � Stop the device and switch off the power before connecting or disconnecting cables.
Packing List After opening the product packaging, check each item against the following checklist. Contact the supplier if there are any discrepancies. GPON terminal Power adapter Quick Start Network cable NOTE The figures shown in this document may differ from the actual products, but the difference does not affect the functions of the products.
Product Overview Appearance and ports of the HG8245 1 Optical port 2 Ethernet port 3 POTS port 4 Power switch 5 Power port 6 Indicator 7 Backup battery monitoring port 8 USB port 10 WPS switch 11 RESET 4 9 WLAN switch
Installing the GPON Terminal NOTE 1. HG8245 can be mounted onto a wall or be placed on a workbench. 2. Other installation modes are not allowed. Perform the following operations to mount HG8245 onto the wall. Step 1 Mark the positions of two holes, keeping the holes 72 mm from each other. Step 2 Select a proper drill according to the outer diameter of the screws. Use a hammer drill to drill the marked positions on the wall. Then clean the wall and install two expansion bolts.
Connecting Cables Cable Connections Between the HG8245 and Other Devices 1 Optical port in the wall 2 PC 3 IP STB 4 TV set 5 Phone 6 Fax machine 7 Power socket 8 Backup battery unit 9 USB storage device 10 Wi-Fi terminal 6
Connecting Cables Refer to the preceding cable connections of each product and select the following corresponding steps to connect the GPON terminal. Step 1 Use an optical fiber to connect the OPTICAL port on the GPON terminal to the optical port in the wall. NOTE The optical connector connected to the OPTICAL port on the HG8245 is an SC/APC connector, and the type of the optical connector connected to the optical port in the wall is determined by practical conditions.
Logging in to the Web Configuration Window Perform the following steps to log in to the Web configuration window of a GPON terminal. Step 1 Set the IP address of the PC in the same subnet 192.168.1.64 – 192.168.1.253. Example: - IP address: 192.168.1.100 - Subnet mask: 255.255.255.0 NOTE The default management IP address and subnet mask of the GPON terminal are as follows: - IP address: 192.168.1.254 - Subnet mask: 255.255.255.
Indicator Description Table 1 Indicator status description 1 Indicator WPS WLAN USB Status Steady on The WPS function is enabled. Blinking A Wi-Fi terminal is connecting to the system. Off The WPS function is disabled. Steady on The WLAN function is enabled. Blinking Data is being transmitted. Off The WLAN function is disabled. Steady on The USB port is already connected but no data is transmitted. Blinks twice a second Data is being transmitted.
Indicator Description PON is GPON indicator. The status of PON reflects the connection between GPON terminal and its upper-layer device. The following table describes the status of the PON indicator. Table 2 Indicator status description 2 Indicator Status Description The fiber connection between the terminal and the uplink Green steady on device is set up. PON Green blinking The terminal attempts to set up a connection with its upperlayer device.
FAQs The POWER indicator Is off. � Check whether the ON/OFF button on the rear plane is depressed. � Ensure that the power adapter matches the GPON terminal. � Check whether the power supply is connected properly. The LAN indicator is off. � Ensure that the network cable matches the GPON terminal. � Check whether the network cable is properly connected. � Check whether the network adapter works in the normal state. The TEL indicator is off. � Check whether a voice service user is configured and enabled.
Technical Specifications Item HG8245 Dimensions(H x W x D) 195mm×174mm×34mm Weight (including the power adapter) About 550g System power supply 11V – 14V DC, 2A Power adapter input 100V – 240V AC 50Hz – 60Hz Maximum system power consumption 14W Ambient temperature 0oC – +40oC Ambient humidity 5% – 95%(non-condensing) NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Warranty Card Thank you for choosing Huawei Technologies Co., Ltd.To get better services, please read this warranty card carefully, fill in the required information, and preserve this card in good condition.
Limited Warranty Subject to the exclusions contained below, Huawei Technologies Co., Ltd. (Huawei for short) warrants its access terminals ("Products") to be free from defects in materials and workmanship under normal consumer usage for one year from the date of purchase of the product ("Warranty period"). During the warranty period, a Huawei authorized service partner shall remedy defects in materials and workmanship free of charge. Special Notice: 1.
Qualification Card PASS Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Web site: http://www.huawei.
