EchoLife HS8245W V300R017C10 Installation Guide Issue: 01 Date: 2017-01-11 HUAWEI TECHNOLOGIES CO., LTD.
Safety Information Safety Precautions • Before any operation, read the instructions and precautions in this document carefully to minimize the possibility of accidents. • The Danger, Caution, and Note items in the documents do not cover all the safety precautions that must be followed. These signs only provide the common safety precautions for operations. • When operating Huawei products and devices, comply with safety precautions and special safety instructions specific to each Huawei.
Safety Information Laser Safety • Detailed description ① Keep the optical ports of the module clean, and cap them when they are not used. ② Prevent the end faces of the optical interfaces of the module from being damaged by hard objects. ③ Exercise caution when removing and reinserting the fibers for the SC optical ports on the module. Do not damage the ceramic sockets of optical components. ④ The goldfinger unit of the module supports no more than 50 times of removal and reinsertion.
Installation Precautions Attaching Labels/Tags Attach a label or tag to the signal cable 20 mm (0.79 in.) away from the connector. When the cable is placed vertically, the label or tag should point to the right. When the cable is placed horizontally, the label or tag should point downwards. After routing a cable, make a label or tag and then attach it to the cable for the easeof-maintenance.
Preparations Tools Preparation Before beginning the installation, prepare the following tools and meters.
Preparations Preparing the Construction Environment No. Item Method 1 Site selection • Select a site that is free of high temperatures, heavy dust, harmful gas, inflammable or explosive materials, low air pressure, great shock, or sharp noise. • Ensure that the site location (such as a wall) meets the bearing capacity requirement of the product. 2 Others Associated devices (such as the battery and UPS), fibers, two-core cables, and screws are available.
Unpacking and Accepting Products Unpacking • The project supervisor must check the products on site in the presence of the customer. • If the package is damaged, stop unpacking and report the condition of the package to a local Huawei representative. If the quantity of the product is correct and the product is in good condition, unpack and accept the product. Items to check for before unpacking the products are shown in the following table. No.
Unpacking and Accepting Products Device Inspection Verify that the device is in good condition, without any damage. Verify that the device components are complete, without any missing parts. Cables Inspection Failure to examine the cables may result in catastrophic equipment damage and service failure. Verify that the specifications of cable connectors meet the requirements for your site.
Product Overview and Technical Specifications Product Overview Product Function 4 Ethernet ports HS8245W 2 POTS ports 2 USB port (USB 2.0 + USB 3.0 ) 2.4 G Wi-Fi (3*3 MIMO)+ 5 G Wi-Fi (4*4 MIMO) Technical Specifications Item Specifications Dimensions (L x W x H) 295 mm x 180 mm x 82 mm Weight (including the power adapter) ≤ 1.
Installing HS8245W Installation Procedure • • • The HS8245W can be installed in environments such as a network cabinet or a wall, and is generally mounted on a wall. Only one operator is required for installing the HS8245W. It is recommended that the operator wear ESD gloves during the installation.
Installing HS8245W Quick Installation HS8245W IP STB Optical port USB storage device PC TV set Phone Optical port Ethernet port POTS port USB port WLAN switch WPS switch Reset Power port Figures in this document may be different from the actual product. However, these differences do not affect the product usage. The actual product prevails.
Installing HS8245W Quick Installation HS8245W Step 1: Use an optical fiber to connect the optical port on the ONT and the optical port on the wall. 1.The type of the optical connector connected to the optical port in the all is determined by practical conditions. 2.To ensure normal use of fibers, make sure that the fiber bend radius is larger than 30 mm. Step 2: Use a network cable to connect the LAN port to a PC or the Ethernet port on the IP STB.
Installing HS8245W ONT supporting Wi-Fi, a wireless network coverage is subject to the number, thickness, and positions of walls, materials, ceilings, or other objects that radio signals traverse. Besides, material type and background radio frequency (RF) noise also affect the coverage of a wireless network. You can maximize the coverage of a wireless network using the following methods: 1. Decrease the number of walls and ceilings between ONT and other network devices.
Indicator Description Table 1 Indicator status description 1 LED Status Description Steady on The device is powered on Off The power supply is cut off. POWER PON See Table 2. LOS See Table 2. TEL1 TEL2 USB LAN1 LAN2 LAN3 LAN4 WLAN WPS Steady on The terminal is registered with the softswitch but no service flows are transmitted. Blinking Service flows are transmitted. Off The terminal is not powered on or fails to be registered to the softswitch.
Indicator Description Table 2 Indicator status description 2 Status No. 1 Status Description PON LOS Off Off The PON terminal is prohibited by the upper-layer device or blinks abnormally , contact the service provider for help. Blinks twice a second 2 Blinks twice a second 3 Blinks twice a second Off 4 Steady on Off A connection is set up between the GPON terminal and its upper-layer device.
FAQs FAQs 1. The LOS indicator blinks. If the LOS indicator blinks once two seconds, check whether the pigtail fiber is properly connected and the connector is clean. If the GPON terminal blinks twice a second, contact the service provider for help. 2. The PON indicator is off. Check whether the OPTICAL port and optical fiber is properly connected. The GPON terminal fails to register with the upper-layer device. Contact the service provider for help. 3.
Warranty Card Thank you for choosing Huawei Technologies Co., Ltd. To get better services, please read this warranty card carefully, fill in the required information, and preserve this card in good condition.
Limited Warranty Subject to the exclusions contained below, Huawei Technologies Co., Ltd. (Huawei for short) warrants its access terminals ("Products") to be free from defects in materials and workmanship under normal consumer usage for one year from the date of purchase of the product ("Warranty period"). During the warranty period, a Huawei authorized service partner shall remedy defects in materials and workmanship free of charge. Special Notice: 1.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129 People’s Republic of China www.huawei.