User's Manual

Quick Start
WS319 300Mbps Wireless Router
2 Building a network connection with computer
1 Connecting Devices


SSID: XXXX
WLAN Key:
1. Click in the lower right
corner of your desktop.
2. From the wireless network
list, select the WLAN
provided by the WS319.
Click Connect.
3. In the displayed dialog box,
enter the WLAN password
and click OK.
4. In the wireless network list,
check the WLAN connection
status. If the status is
Connected, the computer is
wirelessly connected to the
WS319.
1. Click
in the lower right
corner of your desktop,
choose Open Network and
Sharing Center.
2. Choose Change
adapter settings.
Right-click Local Area
Connection and choose
Properties.
Procedure on Computers Running Windows 7.
Procedure on Computers Running Windows 7
3. Double-click Internet
Protocol Version 4 (TCP/
IPv4).
4. Select Obtain an IP
address automatically
and Obtain DNS server
address automatically.
Click OK.
Mode Ⅱ
Wireless connection
Mode Ⅰ
Wired connection
If the wireless device (laptop, tablet, or mobile phone) has been WPS-capable, you can use the WPS-capable to establish a wireless
connection between them. For more help，visit http://consumer.huawei.com/en/ to obtain the WS319 user guide.
Please ensure that your computer has
installed and enabled the wireless
network adapter.
View SSID and WLAN key
Setting the Computer IP Address
Wireless Connection Setup
Procedure on Computers Running Windows XP.
Procedure on Computers Running Windows XP.
1. Click in the lower right
corner of your desktop.
2. In the displayed dialog box,
click Properties.
3. Double-click Internet
Protocol (TCP/IP).
4. Select Obtain an IP
address automatically
and Obtain DNS server
address automatically.
Click OK.
1. Click in the lower right
corner of your desktop.
2. From the wireless network list, select the WLAN provided by the WS319. Click
Connect.
3. In the displayed dialog box, enter the
WLAN password and click Connect.
4. In the wireless network list, check the WLAN connection status. If the status is
Connected, the computer is wirelessly connected to the WS319.
Connect the cables as shown in the gure above, and plug the power adapter into the
wall-mounted power outlet to power on the WS319.
After the WS319 is powered on, the WS319 power indicator turns on.
The following table lists how the indicators behave when the WS319 is operating correctly.
If the indicators do not behave as expected, ensure that everything is plugged in correctly.
Indicator
Working
Power Steady on
Internet Steady on
WLAN Steady on
WPS Steady off
LAN
Steady on ( A LAN port is connected to a computer or other Ethernet
device through a network cable.)
Connect your devices in the sequence indicated in the following gure.
Before conguring the router, you need to build the network connection between this device and the router.
Wired connection applies to the computers without wireless network adapter. Wireless connection applies to the devices supporting wireless Internet access, such as smart
phone and tablet.
Wireless connection
16:30
15:30
16:30
For More Help
Please visit www.huaweidevice.com/worldwide/support/hotline for recently
updated hotline and email address in your country or region.
Copyright © Huawei Technologies Co., Ltd. 2014. All rights
reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES
NOT CONSTITUTE ANY KIND OF WARRANTIES.
Privacy Policy
To better understand how we protect your personal information, please see
the privacy policy at http://consumer.huawei.com/privacy-policy.
Wired connection
WS319
LAN1 LAN2 LAN3 LAN4WAN
Power WPS/Reset
3
1
2
Desktop computer
Laptop computer
Pad
Smart Phone
Power cable
Network cable
Network cable