ZN-U9021 User's Manual ZDC ZN-U9021 User's Manual 第I页
ZN-U9021 User's Manual Copyright description The company's user manual contains no explicit or implicit guarantees, including the sale or installation of a guarantee for a special purpose. The company has the right to change or amend the manual without notice. Without the written permission of the company, any content of this manual shall be copied. About this manual Use this manual to install and use a wireless access point.
ZN-U9021 User's Manual FCC Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation.
ZN-U9021 User's Manual 1.6 W/kg averaged over one gram of tissue.Device PAU08 (FCC ID: QISZN-U9021) has been tested against this SAR limit. SAR information on this can be viewed on-line at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search.This device was tested for typical operations 5mm from the body. To maintain compliance with FCC RF exposure requirements, 5mm separation distance should .
ZN-U9021 User's Manual Catalog Chapter 1 Introduction--------------------------------------------------------------1 Install equipment ---------------------------------------------------------------------5 Access local area network through AP----------------------------------------- 6 PC access and run Chariot --------------------------------------------------------7 The second chapter is the function of the function and the performance specification (the main parts specification, the System Compatibility
ZN-U9021 User's Manual Chapter 1 Introduction to use Install equipment 1、 the ZN-U9021 into the notebook or desktop USB interface; 2、 to ensure that the host is installed 10.04.4 Ubuntu system; 3、 in the system, in order to execute the following commands: 1). Install 2.6.34 kernel $ dpkg -i linux-headers-2.6.34-020634_2.6.34-020634.201502251850_all.deb $ dpkg -i linux-headers-2.6.34-020634-generic_2.6.34-020634.201502251850_i386.deb $ dpkg -i linux-image-2.6.34-020634-generic_2.6.34-020634.
ZN-U9021 User's Manual $ export CONFIG_NL80211_TESTMODE=y $ make BOARD_TYPE=x86 8). Create the folder "/lib/firmware/ath6k/AR6004/hw3.0" and copy bdata.bin, otp.bin, utf.bin to there. 9). Check USB (like 0cf3:9375 Atheros Communications, Inc.) $ lsusb 10). Insert modules $ cd WLAN-AIO/rootfs-x86.build/lib/modules $ insmod ./compat.ko $ insmod ./cfg80211.ko $ insmod ./ath6kl_usb.ko ath6kl_p2p=0 debug_quirks=0x10 11). Run TCMD $ .
ZN-U9021 User's Manual 5、 according to the actual need to modify the test.sh file, so that the device associated with different SSID, but also by modifying the wlan0 and eth0 port IP address and iptables configuration device to adapt to different network environment. PC access and run Chariot 1, will be installed with the Chariot software PC access equipment installed PC's cable network; 2. For example, the wlan0 address of the PC port of the device is 192.168.2.
ZN-U9021 User's Manual Gateway: 192.168.2.200 5, according to the above method, the two installed Chariot computer can carry on the rate test.
ZN-U9021 User's Manual Serial number Project Project description Requirement specification Outgoing port number Outgoing port type Special specificati ons 1 Special specificati ons 2 1 6 Special specificatio ns 3 7 Special specificatio ns 4 Integrated antenna Antenna main direction parallel USB interface direction The antenna efficiency is more than 20%, to air 8 Special specificatio ns 5 The antenna VSWR is less than or equal to 4 9 Special specificatio ns 6 10 Special specificatio ns 7
ZN-U9021 User's Manual Serial number 12 Project Project description Special specificatio ns 9 Requirement specification Maximum Target Power for Production Unit 802.11b CH1~11: 17.5±1 dBm, CH12: 15±1 dBm,CH13: 13±1 dBm 802.11g CH1~11: 16±1 dBm,CH12: 13±1 dBm, CH13: 11±1 dBm 802.
ZN-U9021 User's Manual Serial number 14 Project Project description Special specificatio ns 9 Requirement specification Transmit spurious requirements: (WiFi antenna, conducting spurious test) ≤ -36dBm/MHz @9KHz~700MHz； ≤ -97dBm/MHz @700~1000MHz； ≤ -88dBm/MHz @1000~1710MHz； ≤ -97dBm/MHz @1710~2370MHz； ≤ -97dBm/MHz @2500~2690MHz； ≤ -88dBm/MHz @2690~3400MHz； ≤ -97dBm/MHz @3400~3800MHz； ≤ -36dBm/MHz @3.8~12.
ZN-U9021 User's Manual Serial number 15 Project Project description Special specificatio ns 10 Requirement specification Transmit spurious requirements: (WiFi antenna, conducting spurious test) ≤-36dBm/MHz， @9KHz~700MHz； ≤ -97dBm/MHz @700~1000MHz； ≤ -88dBm/MHz @1000~1710MHz； ≤ -97dBm/MHz @1710~2370MHz； ≤ -97dBm/MHz @2500~2690MHz； ≤ -88dBm/MHz @2690~3400MHz； ≤ -97dBm/MHz @3400~3800MHz； ≤ -36dBm/MHz @3.8~12.
ZN-U9021 User's Manual Serial number 20 Project Project description Physical interface Requirement specification No light module Length: 40mm Width: 19mm High: less than 7mm 21 Machine shell Note: the above dimensions are included in the tolerance, and the USB connector is in the middle of the module. 1, USB 2 standard interface 2, the shape and size of the detailed requirements in the attachment: 《ZN-U9021.pdf》 The outer plastic shell is required for easy operation.
ZN-U9021 User's Manual Second chapter quality and reliability specifications Seri al Project Project description Requirement specification 1 Device failure rate (FIT) Required maximum device failure rate 100fit 2 Other Consider the need to specify the indicators.
ZN-U9021 User's Manual The third chapter is the environmental adaptability specification Seri al numb Project Project description Requirement specification er Operating temperature range -20 C ~ +70, note: this temperature range to ensure that the performance indicators meet the specifications. This temperature refers to the WiFi USB single plate temperature.
ZN-U9021 User's Manual Chapter 1 The second chapter EMC and safety regulations Seri al numb Project Project description Requirement specification Specifications IEC specifications / UL specifications / other Complete CE certification, provide certification report Provided by the formal authority of the test room, preferably third party test report, including the corresponding standard requirements of all test items Provide CE certification report er 1 2 Test report 3 Reliability test 错误！未找到引
ZN-U9021 User's Manual Fourth chapter product life cycle Seri al numb Project Project description Requirement specification er 1 Product life 5 years or cycle more requirem ents Over 5 years Accessory： 1、 the overall shape and size of the following requirements are as follows: 错误！未找到引用源。 错误！未找到引用源。 第 14 页
ZN-U9021 User's Manual Appendix. National / regional and channel Table 6 national / regional frequency division list Country / Region Australia Austria Canada China Denmark Finland France Germany Hongkong Iceland Ireland Italy Japan Liechtenstein Luxemburg Holland New Zealand Norway Portugal Singapore Spain Sweden Switzerland Taiwan Britain 2.4G Band U.S.
