MediaPad T3 10 User Guide AGS-W09&AGS-L09_ 01_ English

1 Open Settings.
2 Touch More > Tethering & portable hotspot.
3 Switch on Bluetooth tethering to share your mobile Internet.
4 On the Bluetooth screen, touch
next to the paired device,and then switch on Internet
access to share your mobile Internet.
Wi-Fi
Connecting to the Internet using Wi-Fi
Connecting to a Wi-Fi network
1 Go to Settings.
2 Touch Wi-Fi and turn on the Wi-Fi switch. Your device will display a list of available Wi-Fi
networks.
l Refresh the list: Touch Scan to refresh the list of available Wi-Fi networks.
l Manually add a network: Swipe down to the bottom of the menu and touch Add
network…. Follow the onscreen instructions to enter the network name and password
manually.
3 Select the Wi-Fi network you want to connect to:
l If the Wi-Fi network does not require a password, your device will connect automatically.
l If the network is protected, enter the password when prompted and touch Connect.
Connecting to a Wi-Fi network using Wi-Fi Protected Setup (WPS)
WPS allows your device to connect to a WPS-enabled router without entering a password.
1 Go to Settings.
2 Touch Wi-Fi and switch on Wi-Fi.
3 Touch > Advanced Wi-Fi settings. There are two options:
l Touch WPS connection and press the router's WPS button.
l Touch WPS PIN connection to generate a PIN, and then enter the PIN on the router.
Using a QR code to share your Wi-Fi hotspot
Create a QR code to share your device's Wi-Fi hotspot with friends.
l QR codes can be generated for the following wireless encryption methods: WPA, WPA2,
WEP, WPA-PSK, and WPA2-PSK. You cannot use a QR code to connect to WLAN
networks that are encrypted using the EAP protocol.
l Ensure that the connecting device supports using QR codes to import Wi-Fi network
credentials.
Network and Sharing
26