Mate 10 User Guide (ALP-L29, 01,EN,Normal)

Transfer Data Between Your Phone and a USB Device
USB OTG (USB On-The-Go) lets you transfer data directly between your phone and other devices (such
as phones, tablets, cameras, and printers) without requiring a computer. You can also use an USB OTG
cable to connect your phone directly to a USB storage device and transfer les.
Transfer data between your phone and a microSD card
You can read your phone's microSD card directly using a USB OTG cable.
l This feature is only available on phones with USB OTG support.
l If your phone has a USB Type-C port, you will need to purchase a Huawei-certied Micro USB
to USB Type-C adapter or a USB OTG cable with a USB Type-C connector.
1 Connect two devices using a USB OTG cable and USB cable.
USB OTG cable
USB cable
2 Set the USB connection mode to USB drive or Device le manager (MTP) mode.
3 Go to Files > Local > SD card, navigate to the microSD card, select the data that you want to
copy, and then copy it to the target folder.
4 Once the transfer is complete, go to Settings > Storage > SD card > Eject.
5 Disconnect the USB OTG cable and USB cable from the two devices.
Transfer data between your phone and a USB storage device
You can use an OTG cable to access USB storage devices (including USB drives and card readers)
directly from your phone.
Device Connection
110