P40 User Guide-(ANA-LX4&NX9,EMUI11.1_01,en-us)

You can enable or disable Airplane mode using the following methods:
• Swipe down from the upper right edge of the screen to display Control Panel and touch
to expand the shortcut switches panel (depending on your device model). Enable or
disable Airplane mode.
• Go to Settings > Mobile network and enable or disable Airplane mode.
When Airplane mode is enabled, Wi-Fi and Bluetooth will automatically be disabled.
You can re-enable Wi-Fi or Bluetooth if allowed to do so by the airline.
Project Your Phone Screen Wirelessly
Project your phone wirelessly to stream movies and work on a bigger screen (such as a TV).
Dierent display devices support dierent projection protocols. Therefore, the projection
method may vary. Choose a suitable method based on the protocol supported by your device.
For details about the supported projection protocols, refer to the product manual or
contact the product manufacturer.
Display devices that support DVKit, Cast+, or Miracast:
1 Ensure that the DVKit/Cast+/Miracast switch or the projection switch is enabled on the
display device. For details about how to turn on the switch, refer to the product manual or
contact the product manufacturer.
2 Swipe down from the upper right edge of your phone to display Control Panel and touch
.
3 In Control Panel, touch to expand the shortcut switches panel (depending on your
device model) and touch Wireless Projection. Your phone will then start searching for
available external displays.
Alternatively, go to Settings > More connections > Easy Projection or to Settings >
More connections and enable Wireless projection (depending on your device model).
4 Touch the device that you want to project your phone to from the detected devices.
By default, after the connection is successful, banner notications for incoming calls,
messages, and alarms, and Multi-Window are only displayed on your phone instead of the
external display. To show
notications on the external display, touch and turn o the
switch for Hide notications.
The Hide notications feature is only supported on certain device models.
To exit wireless projection, touch on the phone screen or swipe down from the upper left
edge of the screen to display Notication panel and touch Disconnect (depending on your
device model).
Display devices that support DLNA:
1 Before you get started, connect your phone and the display device to the same Wi-Fi
network.
Settings
120