P40 User Guide-(ANA-LX4&NX9,EMUI11.1_01,en-us)

Table Of Contents

3 Align the white frame in the Picture-in-Picture preview frame with the subject. When this

frame turns yellow, it indicates that the camera has identied the subject. Then touch the

yellow frame. When it turns green, it indicates that the camera has successfully locked

onto your target.

4 Touch

to take a photo.

• Currently, intelligent tracking only supports solo shots.

• If the camera isn't aimed at the subject you want to capture, your phone will

temporarily exit the target tracking status (if so, the green frame in the Picture-in-

Picture preview frame will turn white). If the target tracking is paused for an extended

period of time, it will automatically restore to the non-tracking status.

Take Panoramic Photos

Add some width to your landscape or group photos with the Panorama feature. The camera

takes multiple photos of objects within your

eld of view and stitches them together into a

single panoramic photo.

Use the Rear Camera to Take Panoramic Photos

Panorama mode combines multiple shots into a seamless panoramic photo. Simply move the

camera as you shoot and the camera will take care of the rest.

1 Go to Camera > More and select Panorama mode.

2 Touch and set the pan direction.

3 Point the camera at your starting point, then touch

to start shooting. Move the

camera in the direction of the arrow displayed on the screen. Keep the arrow on the

center line when you are taking the photo.

4 Touch

when you are nished.

Use the Front Camera to Take Panoramic Seles

1 In Panorama mode, touch to switch to the front camera.

Touch

and drag the slider to adjust the beauty eect. A larger value will produce a

more pronounced beauty eect.

2 Point the camera at the center of your shot, then touch to take the rst photo.

3 Turn the camera to the left and right slowly as instructed. When the two frames on the

viewnder overlap, the camera will automatically take the second and last photos.

Camera and Gallery