Huawei AP4030DN AP4130DN Access Points Datasheet
Huawei AP4030DN AP4130DN Datasheet Access Points 01 Product Overview............................................................................................................................. // Huawei AP4030DN and AP4130DN are cost-effective wireless access points that support 802.11ac Wave 1, 2 x 2 MIMO, and two spatial streams.
Huawei AP4030DN AP4130DN Datasheet Access Points • 02 Interference suppression ˉ Huawei's Clear Channel Assessment (CCA) optimization technology reduces the possibility of air port resources shared by multiple devices, allows higher user access, and improves the throughput. • Air port performance optimization ˉ In high-density scenarios where many users access the network, the increased number of low-rate STAs consumes more resources on the air port, reduces the AP capacity, and lowers user experience.
Huawei AP4030DN AP4130DN Datasheet Access Points • 03 Automatic radio calibration ˉ Automatic radio calibration allows an AP to collect signal strength and channel parameters of surrounding APs and generate AP topology according to the collected data. Based on interference from authorized APs, rogue APs, and non-Wi-Fi interference sources, each AP automatically adjusts its transmit power and working channel to make the network operate at the optimal performance.
Huawei AP4030DN AP4130DN Datasheet Access Points Item Environmental specifications 04 Description Operating temperature –10oC to +50oC Storage temperature –40oC to +70oC Operating humidity 5% to 95% (non-condensing) Dustproof and waterproof grade IP41 Altitude –60 m to +5000 m Atmospheric pressure 70 kPa to 106 kPa Antenna type AP4030DN: built-in antennas (horizontal beamwidth 360°) AP4130DN: external dual-band antennas Antenna gain • AP4030DN: 4 dBi (2.
Huawei AP4030DN AP4130DN Datasheet Access Points 05 Software specifications Item Description • Compliance with IEEE 802.11a/b/g/n/ac • Maximum rate: 1.167 Gbit/s • Maximum Ratio Combining (MRC) • Cyclic Delay Diversity (CDD)/Cyclic Shift Diversity (CSD) • Maximum Likelihood Detection (MLD) • Data unit aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx only) • 802.
Huawei AP4030DN AP4130DN Datasheet Access Points Item 06 Description • Compliance with IEEE 802.
Huawei AP4030DN AP4130DN Datasheet Access Points Item Security features Maintenance features BYOD 07 Description • Open system authentication • WEP authentication/encryption • WPA/WPA2-PSK authentication and encryption • WPA/WPA2-802.1x authentication and encryption • WPA-WPA2 authentication • WAPI authentication and encryption • WIDS including rogue AP and STA detection, attack detection, STA/AP blacklist and whitelist • 802.
Huawei AP4030DN AP4130DN Datasheet Access Points 08 Standards compliance Item Safety standards Radio standards EMC standards Description UL 60950–1 EN 60950–1 IEC 60950–1 GB 4943 ETSI EN 300 328 RSS-210 ETSI EN 301 893 AS/NZS 4268 EN 301 489–1 YD/T 1312.2-2004 AS/NZS CIPSR22 EN 301 489–17 ITU k.21 EN 55022 ETSI EN 60601-1-2 GB 9254 EN 55024IEC61000-4-6 FCC Part 15 GB 17625.1 IEC61000-4-2 IEEE 802.11a/b/g IEEE 802.11d IEEE 802.11u IEEE 802.11n IEEE 802.11e IEEE 802.
Huawei AP4030DN AP4130DN Datasheet Access Points 09 AP4030DN Antenna Pattern Plots 2.4G (PHI=0) 2.
Huawei AP4030DN AP4130DN Datasheet Access Points 10 Ordering Information Component Part Description Configuration Description Remarks AP AP4030DN Broadband Network Terminal,AP4030DN,11ac, 2*2 Double Frequency The mounting bracket is included The standard configuration does not in the standard configuration. include the network cable.
Copyright © Huawei Technologies Co., Ltd. 2016. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademark Notice , HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners.
