Huawei-AP4030DN-Hardware-Installation-and-Maintenance-Guide-02pdf

Table Of Contents

Huawei AP4030DN

Hardware Installation and Maintenance Guide

5 Appendix

Issue 02 (2015-05-18)

Huawei Proprietary and Confidential

Figure 5-38 Pins of an RJ45 connector

Pin8

Pin1

Procedure

Step 1 Feed both connectors of the cable into the ports of the cable tester.

Step 2 After the connectors are properly inserted, turn on the tester. If the indicators from 1 to G turn

on simultaneously, you can infer that the pins work normally and the wires are correctly

connected.

Turn the switch to the S position to slow down lighting of the indicators so that you can see the

indicators more clearly, as shown in Figure 5-39.

Figure 5-39 Testing the conduction and connections of wires

Step 3 Gently shake the connector and repeat Step 2 to check whether the metal contact strips are in

good contact with the core wires and Ethernet ports, as shown in Figure 5-40.