Huawei-AP5010DN-AGN-Dual-Band-Access-Point-Datasheet

Dual Band Access Point

Model : Huawei AP5010DN-AGN

AP5010 wireless Access Point (AP) series offers superior value and flexibility with 2.4 GHz and 5 GHz radios,

IEEE 802.11a/b/g/n standards compliance, and Fit AP or Fat AP operation. It supports Multiple-Input Multiple-

Output (MIMO) technology, provides radio coverage in a larger area, and offers services simultaneously on 2.4

GHz and 5 GHz frequency bands to connect more users.

The AP5010 provides comprehensive service support capabilities and features proven reliability, high security,

simple network deployment, automatic AC discovery and configuration, and real-time management and

maintenance for indoor environments.



• 2 x 2 MIMO technology, with built-in antennas and a maximum rate of 300 Mbit/s for each radio

• Integrated Fit AP and Fat AP functions

• Value-added services, such as spectrum analysis and locating service

• Wireless Distribution System (WDS)/Mesh networking

• Wireless Intrusion Detection System (WIDS)/Wireless Intrusion Prevention System (WIPS)

• High Density Boost

• Fast roaming without service interruption

• IPv6 support

• PoE power supply in compliance with IEEE 802.3af/at, simplifying installation

• Dual-band AP5010DN-AGN: works on both 2.4 GHz and 5 GHz frequency bands

Recommended for smaller locations with simple building structures, high user density, and high capacity demands,

such as enterprise offices, campuses, hospitals, large shopping malls, and exhibition centers.

PAGE 1
Dual Band Access Point Model : Huawei AP5010DN-AGN AP5010 wireless Access Point (AP) series offers superior value and flexibility with 2.4 GHz and 5 GHz radios, IEEE 802.11a/b/g/n standards compliance, and Fit AP or Fat AP operation. It supports Multiple-Input MultipleOutput (MIMO) technology, provides radio coverage in a larger area, and offers services simultaneously on 2.4 GHz and 5 GHz frequency bands to connect more users.
PAGE 2
Parameters Power input Specifications   12V DC ± 10% PoE power supply: –48V DC (in compliance with IEEE 802.3af/at) Maximum power consumption 9.
PAGE 3
Antenna type Built-in antennas Antenna gain 2.4 GHz: 4 dBi, 5 GHz: 5 dBi Maximum users ≤ 128 Maximum TX power 17 dBm for each radio port Power increment 1 dBm WLAN features Network features  Compliance with IEEE 802.