AP5030DN and Access Points Datasheet

Huawei
AP5030DN AP5130DN
Access Points
Datasheet
03
Hardware specifications
• AP access authentication and encryption
ˉ The AP access control ensures validity of APs. The CAPWAP link protection and DTLS encryption provide security assurance, improving
data transmission security between the AP and the AC.
Automatic radio calibration
Automatic radio calibration allows an AP to collect signal strength and channel parameters of surrounding APs and generate AP topology
according to the collected data. Based on interference from authorized APs, rogue APs, and non-Wi-Fi interference sources, each AP automatically
adjusts its transmit power and working channel to make the network operate at the optimal performance. In this way, network reliability and user
experience are improved.
Automatic application identification
Huawei APs support smart application control technology and can implement visualized control on Layer 4 to Layer 7 applications.
• Traffic identification
ˉ Coupled with Huawei ACs, the APs can identify over 800 common applications in various office scenarios. Based on the identification
results, policy control can be implemented on user services, including priority adjustment, scheduling, blocking, and rate limiting to
ensure efficient bandwidth resource use and improve quality of key services.
• Traffic statistics collection
ˉ Traffic statistics of each application can be collected globally, by SSID, or by user, enabling the network administrator to know application
use status on the network. The network administrator or operator can implement visualized control on service applications on smart
terminals to enhance security and ensure effective bandwidth control.
Basic Specifications
.......................................................................................................................... //
Item Description
Technical
specifications
Dimensions (H x W x D) 53 mm x 220 mm x 220 mm
Weight 1.0 kg
Interface type
2 x 10/100/1000M self-adaptive Ethernet interface (RJ45)
1 x Management console port (RJ45)
LED indicator Indicates the power-on, startup, running, alarm, and fault status of the system.
Power
specifications
Power input
• 12 V DC ± 10%
• PoE power supply: –48 V DC (in compliance with IEEE 802.3af/at)
Maximum power
consumption
12.95W
NOTE
The actual maximum power consumption depends on local laws and regulations.