Huawei AP7110DN-AGN&7110SN-GN Access Points V200R003C00 Product Description Issue 01 Date 2013-04-30 HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description About This Document About This Document Intended Audience This document describes the positioning, characteristics, hardware structure, product features, and technical specifications of the AP. This document helps you understand the characteristics and features of the AP.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description About This Document Change History Changes between document issues are cumulative. The latest document issue contains all the changes made in previous issues. Changes in Issue 01 (2013-04-30) This is the initial commercial release. Issue 01 (2013-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description Contents Contents About This Document.....................................................................................................................ii 1 Product Positioning and Characteristics...................................................................................1 1.1 Product Positioning............................................................................................................................................
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description 1 1 Product Positioning and Characteristics Product Positioning and Characteristics About This Chapter 1.1 Product Positioning 1.2 Product Characteristics Issue 01 (2013-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description 1 Product Positioning and Characteristics 1.1 Product Positioning Table 1-1 Product positioning Product Model Frequency Band IEEE Standard Compliance Positioning Usage Scenario AP7110DNAGN Dual band: IEEE 802.11a/ b/g/n The AP7110DNAGN is the latest generation technologyleading AP. It supports 3 x 3 MIMO and provides comprehensive service support capabilities.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description 1 Product Positioning and Characteristics Figure 1-1 Fit AP networking (AP mode) NMS Authentication system AC Switch AP1 STA …… STA AP n Residential Business users users Management channel between NMS and AC Management channel between the AC and the AP and data channel Where data flows are encapsulated with CAPWAP Channel where data flows are not encapsulated with CAPWAP In this networking, the AP functions as a fit AP and provides
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description 1 Product Positioning and Characteristics Figure 1-2 Fit AP networking (WDS mode: point-to-point) Figure 1-3 Fit AP networking (WDS mode: point-to-multipoint) In this networking, the AP connects two or more independently wired or wireless LANs through wireless links to construct a network on which users can exchange data.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description 1 Product Positioning and Characteristics Figure 1-4 Fit AP mesh networking On the preceding network, mesh routers function as mesh points (MPs) and are fully-meshed to establish an auto-configured and self-healing wireless mesh network (WMN). Mesh routers with the gateway function can work as the mesh portal points (MPPs) through which the WMN can provide access to the Internet. Terminals connect to mesh routers to access the WMN.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description 1 Product Positioning and Characteristics Product Characteristics Description High-speed and reliable wireless access l AP7110DN-AGN: complies with IEEE 802.11a/b/g/n. l AP7110SN-GN: complies with IEEE 802.11b/g/n. l Supports 3 x 3 MIMO and provides a maximum rate of 450 Mbit/s. l Supports Wi-Fi Multimedia (WMM) and priority mapping on the air interface and wired interface. l Supports wired link integrity check. l Supports load balancing.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description 1 Product Positioning and Characteristics Product Characteristics Description Flexible networking and environment adaptability l Provides flexible networking capabilities and applies to various application scenarios. Mesh and WDS scenarios are supported only in Fit AP mode. l Has strong environment adaptability.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description 2 Hardware Structure 2 Hardware Structure About This Chapter 2.1 AP7110DN-AGN 2.2 AP7110SN-GN Issue 01 (2013-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description 2 Hardware Structure 2.1 AP7110DN-AGN Appearance Figure 2-1 shows the appearance of the AP7110DN-AGN. NOTE The actual device appearance may be different from the following device appearance, but these differences will not affect device functions. Figure 2-1 AP7110DN-AGN appearance WARNING There is a scald warning label attached on the device, warning you not to touch the device after the device has been operating for a long time.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description 2 Hardware Structure Figure 2-2 Interfaces on the AP7110DN-AGN As shown in Figure 2-2, the AP7110DN-AGN has the following interfaces. 1. Ground point: connects to a ground cable. 2. Console interface. 3. ETH/PoE interface: a 10/100/1000M interface, which connects to the wired Ethernet and supports the PoE power supply. 4. Default button: restores factory settings if you hold down the button more than 3s. 5.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description Information Type Running and connection status SYS LED Link LED WiFi LED Description Steady red – – Memory check fails or the system software fails to be loaded. Blinki ng green once every 2s (0.5 Hz) Off Off The system is running properly, but no Ethernet connection is available. Radios are disabled. Blinkin g green The system is running properly, but no Ethernet connection is available. The AP has STAs connected to the 2.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description Information Type SYS LED Link LED 2 Hardware Structure WiFi LED Description Blinkin g green and yellow alternat ely The system is running properly and the Ethernet connection is normal. The AP has STAs connected to the 2.4 GHz and 5 GHz bands. The indicator blinks more quickly when more data is being transmitted. 2.2 AP7110SN-GN Appearance Figure 2-3 shows the appearance of the AP7110SN-GN.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description 2 Hardware Structure Figure 2-4 Interfaces on the AP7110SN-GN As shown in Figure 2-4, the AP7110SN-GN has the following interfaces. 1. Ground point: connects to a ground cable. 2. Console interface. 3. ETH/PoE interface: a 10/100/1000M interface, which connects to the wired Ethernet and supports the PoE power supply. 4. Default button: restores factory settings if you hold down the button more than 3s. 5.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description Information Type Running and connection status Issue 01 (2013-04-30) 2 Hardware Structure SYS LED Link LED WiFi LED Description Steady red – – Memory check fails or the system software fails to be loaded. Blinking green once every 2s (0.5 Hz) Off Off The system is running properly, but no Ethernet connection is available. Radios are disabled. Blinking green once every 2s (0.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description 3 Product Features 3 Product Features About This Chapter 3.1 WLAN Features 3.2 Network Features 3.3 QoS Features 3.4 Security Features 3.5 Maintenance Features 3.6 BYOD 3.7 Locating Service 3.8 Spectrum Analysis Issue 01 (2013-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description 3 Product Features 3.1 WLAN Features WLAN features supported by the AP are as follows: l AP7110DN-AGN: complies with IEEE 802.11a/b/g/n. l AP7110SN-GN: complies with IEEE 802.11b/g/n. l AP7110DN-AGN and AP7110SN-GN: provides a maximum rate of 450 Mbit/s. l Maximum ratio combining (MRC) l Maximum-likelihood detection (MLD) l Data unit aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx only) l AP7110DN-AGN: supports 802.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description 3 Product Features l Access control lists (ACLs) l Link Layer Discovery Protocol (LLDP) l Uninterrupted service forwarding upon CAPWAP channel disconnection in Fit AP mode l Unified authentication on the AC in Fit AP mode l AC dual-link backup and VRRP hot backup in Fit AP mode 3.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description 3 Product Features 3.6 BYOD NOTE The AP supports bring your own device (BYOD) only in Fit AP mode. BYOD features supported by the AP are as follows: l Identifies the device type according to the organizationally unique identifier (OUI) in the MAC address. l Identifies the device type according to the user agent (UA) information in an HTTP packet. l Identifies the device type according to DHCP options.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description 4 4 Technical Specifications Technical Specifications About This Chapter 4.1 Basic Specifications 4.2 Radio Specifications 4.3 Standards Compliance Issue 01 (2013-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description 4 Technical Specifications 4.1 Basic Specifications Table 4-1 Basic specifications Item Description Technical specifications Dimensions (H x W x D) 200 mm x 200 mm x 45 mm Weight 1.0 kg System memory l 256 MB DDR3 l 32 MB flash memory Power specifications Power input l DC 12 V ± 10% l PoE power: -48 V DC l AP7110SN-GN: PoE function in compliance with IEEE 802.3af and 802.3at l AP7110DN-AGN: PoE function in compliance with IEEE 802.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description 4 Technical Specifications Item Description Antenna gain l AP7110DN-AGN – 2.4 GHz: 2.5 dBi – 5 GHz: 4 dBi l AP7110SN-GN: 2.5 dBi Maximum number of concurrent users ≤256 Maximum transmit power for each radio 20 dBm Maximum number of nonoverlapping channels for AP7110DNAGN 2.4 GHz 5 GHz 802.11b/g 802.11a l 20 MHz: 3 l 20 MHz: 24 802.11n 802.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description Item 4 Technical Specifications Description 13 @ MCS1 27 @ MCS1 14.4 @ MCS1 30 @ MCS1 19.5 @ MCS2 40.5 @ MCS2 21.7 @ MCS2 45 @ MCS2 26 @ MCS3 54 @ MCS3 28.9 @ MCS3 60 @ MCS3 39 @ MCS4 81 @ MCS4 43.3 @ MCS4 90 @ MCS4 52 @ MCS5 108 @ MCS5 57.8 @ MCS5 120 @ MCS5 58.5 @ MCS6 121.5 @ MCS6 65 @ MCS6 135 @ MCS6 65 @ MCS7 135 @ MCS7 72.2 @ MCS7 150 @ MCS7 13 @ MCS8 27 @ MCS8 14.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description Item Description Receiver sensitivity of the AP7110SNGN 802.11b (CCK): l -97 dBm @ 1 Mbit/s l -92 dBm @ 2 Mbit/s l -93 dBm @ 5.5 Mbit/s l -89 dBm @ 11 Mbit/s 4 Technical Specifications 802.11g (nonHT20): l -91 dBm @ 6 Mbit/s l -90 dBm @ 9 Mbit/s l -90 dBm @ 12 Mbit/s l -88 dBm @ 18 Mbit/s l -84 dBm @ 24 Mbit/s l -81 dBm @ 36 Mbit/s l -77 dBm @ 48 Mbit/s l -74 dBm @ 54 Mbit/s Issue 01 (2013-04-30) 802.11n (HT20): 802.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description Item Issue 01 (2013-04-30) 4 Technical Specifications Description l -75 dBm @ MCS21 l -72 dBm @ MCS21 l -74 dBm @ MCS22 l -71 dBm @ MCS22 l -73 dBm @ MCS23 l -70 dBm @ MCS23 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description 4 Technical Specifications Item Description Receiver sensitivity of the AP7110DNAGN 2.4 GHz 2.4 GHz 2.4 GHz 2.4 GHz 802.11b (CCK) 802.11g (nonHT20) 802.11n (HT20) 802.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description Item Issue 01 (2013-04-30) 4 Technical Specifications Description l -75 dBm @ MCS21 l -72 dBm @ MCS21 l -74 dBm @ MCS22 l -71 dBm @ MCS22 l -73 dBm @ MCS23 l -70 dBm @ MCS23 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description Item Description 5 GHz 5 GHz 5 GHz 802.11a (nonHT20) 802.11n (HT20) 802.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description Item 4 Technical Specifications Description l -72 dBm @ MCS21 l -69 dBm @ MCS21 l -70 dBm @ MCS22 l -68 dBm @ MCS22 l -69 dBm @ MCS23 l -66 dBm @ MCS23 4.3 Standards Compliance Safety standards l UL 60950–1 l CAN/CSA 22.2 No.60950-1 l IEC 60950–1 l EN 60950–1 l GB 4943 Radio standards AP7110DN-AGN: l ESTI EN 300 328 l ESTI EN 301 893 l FCC Part 15C: 15.247 l FCC Part 15C: 15.
Huawei AP7110DN-AGN&7110SN-GN Access Points Product Description 4 Technical Specifications IEEE standards AP7110DN-AGN: l IEEE 802.11a/b/g l IEEE 802.11n l IEEE 802.11h l IEEE 802.11d l IEEE 802.11e AP7110SN-GN: l IEEE 802.11b/g l IEEE 802.11n l IEEE 802.11h l IEEE 802.11d l IEEE 802.11e Security standards l 802.11i, Wi-Fi Protected Access 2 (WPA2), and WPA l 802.
