AP7110SN-GN Access Points Specifications

Figure 2-2 Interfaces on the AP7110DN-AGN

As shown in Figure 2-2, the AP7110DN-AGN has the following interfaces.

1. Ground point: connects to a ground cable.

2. Console interface.

3. ETH/PoE interface: a 10/100/1000M interface, which connects to the wired Ethernet and

supports the PoE power supply.

4. Default button: restores factory settings if you hold down the button more than 3s.

5. Power input interface: 12 V DC.

6. Lock interface: protects the AP against theft.

NOTE

Different power adapters are delivered with the AP products according to standards in the countries or

regions where the AP products are delivered. These countries and regions are identified by the barcode on

an AP's nameplate, including:

l EU (Europe)

l UK (United Kingdom)

l CN (China)

l AU (Australia)

l US (United States)

l USA (the AP is sold only in the U.S)

LED Indicators

Information

Type

SYS

LED

Link

LED

WiFi

LED

Description

Startup status Steady

green

– –

The system is being initialized.

Blinki

green

– –

Memory check, software system, and

system initialization are all normal.

Huawei AP7110DN-AGN&7110SN-GN Access Points

Product Description 2 Hardware Structure

Issue 01 (2013-04-30) Huawei Proprietary and Confidential