Huawei AP7110 Series Brochure-Detailed
Huawei AP7110 Series Brochure-Detailed Huawei AP7110 is a technology-leading Access Point (AP) that works in Fit mode on Wireless Local Area Networks (WLANs). It provides comprehensive service support capabilities and features high reliability, high security, simple network deployment, automatic Access Controller (AC) discovery and configuration, and real-time management and maintenance. Product Features Huawei AP7110SN-GN Access Point • 2.4 GHz frequency band • Compatibility with IEEE 802.
Typical Networking Huawei AP7110SN-GN and AP7110DN-AGN can work in AP, WDS, or Mesh mode. The following figure shows typical AP7110SN-GN and AP7110DN-AGN networking. Fit AP networking Legend Box AC AC6605 2.4 GHz coverage 5.8 GHz bridge Mesh S27/37/57 PoE switch MPP MPP MP MAP MP MP AC6005 MP MAP Office 1 Office 2 Office 3 Office N S27 PoE switch Medium-sized office When working as Fit APs, the AP7110SN-GN and AP7110DN-AGN provide data forwarding functions.
Power input Power specifications Maximum power consumption • • • • 12 V DC ± 10% PoE power supply: -48 V DC AP7110SN-GN in compliance with IEEE 802.3af/at AP7110DN-AGN in compliance with IEEE 802.3at • AP7110DN-AGN: 15.7W • AP7110SN-GN: 8.7W NOTE The actual maximum power consumption depends on local laws and regulations.
Product Features WLAN features AP7110DN-AGN: compliance with IEEE 802.11a/b/g/n AP7110SN-GN: compliance with IEEE 802.11b/g/n AP7110SN-GN: maximum rate of 450 Mbit/s AP7110DN-AGN: maximum rate of 900 Mbit/s Maximum Ratio Combining (MRC) Maximum Likelihood Detection (MLD) Data unit aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx only) 802.
Security features Open system authentication WEP authentication/encryption WPA/WPA2-PSK authentication and encryption WPA/WPA2-802.
EMC standards EN 301 489-1 EN 301 489-17 ETSI EN 60601-1-2 FCC Part 15 ICES-003 YD/T 1312.2-2004 ITU k.21 GB 9254 GB 17625.1 AS/NZS CIPSR22 EN 55022 EN 55024 CISPR 22 CISPR 24 IEC61000-4-6 IEC61000-4-2 AP7110DN-AGN: IEEE 802.11a/b/g IEEE 802.11n IEEE 802.11h IEEE 802.11d IEEE 802.11e IEEE standards AP7110SN-GN: IEEE 802.11b/g IEEE 802.11n IEEE 802.11h IEEE 802.11d IEEE 802.11e Security standards 802.11i, Wi-Fi Protected Access 2 (WPA2), and WPA 802.
Professional Service and Support Huawei WLAN planning tools deliver expert network design and optimization services using the most professional simulation platform in the industry. Backed by fifteen years of continuous investment in wireless technologies, extensive network planning and optimization experience, as well as rich expert resources, Huawei helps customers: • Design, deploy, and operate a high-performance network that is reliable and secure.
