B310 LTE CPE Quick Start
31507294_01
1 Getting to know your B310 On: the B310 is powered on. Power indicator Off: the B310 is powered off. Steady cyan: connected to an LTE network. Steady green: connected to an Ethernet network. Steady red: Network mode indicator – The SIM card is not recognized, the PIN has not been entered, or the PIN verification failed. – Failed to connect to a mobile network or an Ethernet network. Steady on: Wi-Fi turned on. Wi-Fi/WPS indicator Blinking: a WPS connection is being set up.
Steady on: LAN/WAN port is connected to a LAN device or an Ethernet port. LAN/WAN indicator Blinking: data is being transmitted through the LAN/WAN port. Off: LAN/WAN port is not connected to a LAN device or an Ethernet port. On: signal reception available (more bars mean better reception). Signal strength indicator Off: no reception. SIM card slot Install a standard SIM card to access the Internet via an LTE data connection.
2 Installation Scenario 1: Accessing the Internet using an LTE network Step 1: Installing the SIM card 1. Slide off the card slot cover. 2. Insert the SIM card into the card slot. Ensure that the beveled edge of the SIM card aligns with that of the card slot. 3. Close the card slot cover. Do not remove the SIM card when it is in use. Doing so will affect the performance of your B310 and data stored on the SIM card may be lost.
Step 2: Connecting cables To prevent interference caused by radio signals, place the B310 at least 1 meter (3.28 feet) away from telephone and other electrical devices. The B310's power adapter model is HW-120100XYW. X and Y represent letters or numbers that vary by region. For details about the specific adapter model, contact an authorized dealer. Once connected to a power outlet, the B310 automatically powers on.
Optional: Installing the external antenna The external antenna is an optional accessory, and may not included in the packaging box. If required, please contact your local dealer to purchase it. Before installing the external antenna, ensure that the B310 is powered off and disconnected from the power outlet. Only use the external antenna indoors, and do not use it during thunderstorm. Do not change another unexpected antenna unless manufacturer provide.
Scenario 2: Accessing the Internet using Ethernet Connect the B310 to a wall-mounted Ethernet port or an ADSL modem for Internet access. To prevent interference caused by radio signals, place the B310 at least 1 meter (3.28 feet) away from telephone and other electrical devices. The B310's power adapter model is HW-120100XYW. X and Y represent letters or numbers that vary by region. For details about the specific adapter model, contact an authorized dealer.
3 Setting up a Wi-Fi connection Make sure your client (computer, tablet, or smart phone) also supports Wi-Fi. Step 1: Enabling Wi-Fi on the B310 When the indicator is steady on, the Wi-Fi function of the B310 is turned on. For details about how to manually enable or disable the Wi-Fi function, refer to the WLAN settings section of the help information on the web management page. Step 2: Recording the SSID and Wi-Fi key The default SSID and Wi-Fi key are printed on the B310's bottom label.
Method 2: Setting up a Wi-Fi connection through WPS If the client supports WPS, you can set up a WPS connection as follows: 1. Ensure that Wi-Fi is enabled on the client. 2. Press and hold the WPS button for 2 or more seconds. The starts blinking. 3. Activate the WPS connection on the client in 2 minutes. indicator then For instructions about how to enable a WPS connection on the client, see the client's user guide.
4 Configuring your B310 1. After a client is connected to the B310 through Wi-Fi or LAN port, launch a browser on the client and visit http://192.168.8.1. 2. Enter the user name and password to log in to the web management page. The default user name and password are printed on the B310's bottom label. 3. Follow the quick setup wizard to check or set network connection parameters step by step. For details, see the help information on the web management page.
5 For more help If you are experiencing any issues with the B310: Restart the B310. See the help information on the web management page. Restore the B310 to its factory settings. Contact your service provider. Please visit http://consumer.huawei.com/en/support/hotline for recently updated hotline and email address in your country or region. Figures in this guide are for your reference only. Specific models may vary slightly, contact your service provider for more detailed information.
6 Safety information This section contains important information about the operation of your device. It also contains information about how to use the device safely. Read this information carefully before using your device. Electronic device Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices.
Ideal operating temperatures are 0°C to +40°C. Ideal storage temperatures are -20°C to +70°C. Extreme heat or cold may damage your device or accessories. Keep the device and accessories in a well-ventilated and cool area away from direct sunlight. Do not enclose or cover your device with towels or other objects. Do not place the device in a container with poor heat dissipation, such as a box or bag.
fire, explosion or other hazards. Choose only accessories approved for use with this model by the device manufacturer. The use of any other types of accessories may void the warranty, may violate local regulations and laws, and may be dangerous. Please contact your retailer for information about the availability of approved accessories in your area. Power adapter safety The power plug is intended to serve as a disconnect device.
cable, causing the device to malfunction. Before you clean or maintain the device, stop using it, stop all applications, and disconnect all cables connected to it. Do not use any chemical detergent, powder, or other chemical agents (such as alcohol and benzene) to clean the device or accessories. These substances may cause damage to parts or present a fire hazard. Use a clean, soft, and dry cloth to clean the device and accessories.
REACH and RoHS compliance, please visit the web site http://consumer.huawei.com/certification. EU regulatory conformance Statement Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For the declaration of conformity, visit the web site http://consumer.huawei.com/certification. The following marking is included in the product: This device may be operated in all member states of the EU.
7 Legal Notice Copyright © Huawei Technologies Co., Ltd. 2015. All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. and its affiliates ("Huawei"). The product described in this manual may include copyrighted software of Huawei and possible licensors.
OR ANTICIPATED SAVINGS REGARDLESS OF WHETHER SUCH LOSSES ARE FORSEEABLE OR NOT. THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR PERSONAL INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF HUAWEI ARISING FROM THE USE OF THE PRODUCT DESCRIBED IN THIS MANUAL SHALL BE LIMITED TO THE AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT.
