Quick Start Manual

Thank you for purchasing the CPE. This CPE brings you a
high speed wireless network connection.
This document will help you understand your CPE so you can start using it right away.
Please read this document carefully before using your CPE.
For detailed information about the functions and configurations of the CPE, refer to the
online help on the web management page that comes with the CPE.
Note:
You must install Adobe Reader version 6.0 or higher to read the online help.
Getting to Know Your CPE
Note:
The CPE function descriptions and illustrations in this document are for your reference
only. The product you have purchased may vary.
Application Scenario
The CPE can:
 Provide Internet access for Wi-Fi devices and computers.
 Connect to telephones for voice services.
 Connect to fax machines for fax services (optional).
 Be used to save and share files in USB storage devices.
 Expand LAN coverage together with hubs and switches.
Note:
 During thunderstorms and rainy weather, turn off and disconnect the CPE.
 When the CPE is in use, you can alter its position or orientation to improve signal
reception.
 Use a standard or authorized external antenna to avoid CPE malfunctions.
Selecting the Installation Environment
Obstacles such as concrete and wooden walls will affect the transmission of the network
signal. It is recommended that when you install CPE you choose an open space.
Keep the CPE away from equipment that generates strong magnetic and electric fields, for
instance microwaves, refrigerators, and satellite receivers.
Appearance
1
2
3
9
7
8
10
11
12
13
15
16
14
4
5
6
17
○
1
Power indicator
 On: CPE turned on
 Off: CPE turned off
○
2
WLAN indicator
 On: WLAN function enabled
 Blinking: Transmitting data through WLAN
 Off: WLAN function disabled
○
3
WPS indicator
 On: WPS function enabled
 Blinking: WPS interconnection verification is in progress. This process should not take
longer than 2 minutes.
 Off: WPS function disabled
○
4
TEL indicator
 Off: On-hook condition
 Blinking: Incoming call
 On: Off-hook condition
○
5
Mode indicator
 Steady blue: The CPE is connected to an LTE network, but no data is being
transmitted.
 Blinking blue: The CPE is connected to an LTE network and is transmitting data.
 Steady green: The CPE is connected to a UMTS network, but no data is being
transmitted.
 Blinking green: The CPE is connected to a UMTS network and is transmitting data.
 Steady yellow: The CPE is connected to a GSM network, but no data is being
transmitted.
 Blinking yellow: The CPE is connected to a GSM network and is transmitting data.
 Steady red: The CPE failed to connect to a wireless network.
 Steady purple: The SIM card is not recognized, the PIN has not been entered, or the
PIN verification failed.
○
6
Signal indicator
 On: Indicates network signal strength. Full light indicates strong signal.
 Off: No network signal.