B612 LTE CPE Quick Start
1508517_01
1 Product overview Power indicator Network status indicator ® Wi-Fi /WPS indicator LAN/WAN indicator Signal strength indicator Power input LAN/WAN port External antenna sockets Landline phone port Reset button Power button WPS button Micro-SIM card slot 1
2 Setup Insert a micro-SIM card into the micro-SIM card slot as shown in the preceding diagram and then connect the power adapter to the B612 router. The router will turn on automatically and search for available mobile networks. The following indicators will turn on when the router has successfully connected to a network. White: More signal bars indicate a stronger signal. Cyan/blue/yellow: Connected to a mobile network.
3 Connecting to your router's Wi-Fi network SSID：.................... Wi-Fi KEY：............. Once the router has connected to a mobile data network, you can connect your computer or mobile phone to the router's Wi-Fi network to access the Internet. Please refer to the label on the bottom of the router for the default wireless network name (SSID) and password (Wi-Fi KEY). When the indicator is steady on, Wi-Fi is enabled.
4 Configuring your router IP:XXX.XXX.X.X User:yyy Password:zzz XXX.XXX.X.X User name: yyy Password: zzz XXX.XXX.X.X User name： yyy Password： zzz You can configure the router using the web-based management page. Please refer to the label on the bottom of the router for the default IP address, user name, and password. More information can be found in the help section of the web-based management page.
5 Optional configurations The features described in this section are for reference purposes only. Your router may not support all of these features. 1. Connecting multiple devices You can connect a computer, or landline phone to the router to access the Internet, make telephone calls, and more.
2. Installing external antennas You can install external antennas to improve signal reception. Please contact your network service provider to purchase the antennas. If you only require one antenna, plug it into the socket. 1 2 Turn off the router and unplug the power adapter before installing any external antennas. External antennas are only suitable for indoor use. Do not use external antennas during thunderstorms. Only use external antennas provided by your network service provider.
3. Accessing the Internet through an Ethernet port You can connect the router to a wall-mounted Ethernet port using an Ethernet cable to connect to the Internet when you have used up your data allowance. Configure the relevant settings on the web-based management page before connecting to the Internet through an Ethernet port. More information can be found in the help section of the web-based management page.
4. Downloading Huawei HiLink App Scan the QR code to download the Huawei HiLink App and configure the router from your phone.
6 Additional information If you are experiencing any issues with the router: Restart the router. Refer to the help section on the web-based management page. Restore the router to its factory settings. Contact your network service provider. Please visit http://consumer.huawei.com/en/support/hotline for recently updated hotline and email address in your country or region. The illustrations in this guide are for reference purposes only and may not reflect the exact appearance of your product.
7 FAQs How do I restore factory settings? When the router is turned on, press the reset button for approximately 3 indicator starts to blink. seconds using a pointed object until the Restoring factory settings will clear all customized settings. Proceed with caution. How can I connect to the router using Wi-Fi Protected Setup (WPS)? 1. Ensure that Wi-Fi is enabled on the client. 2. Press and hold the WPS button on the router for one second to set up a 2.4 GHz WPS connection.
8 Troubleshooting Why is the router? indicator red after I have finished configuring the 1. Make sure you have a working micro-SIM card and ensure that it is inserted properly. 2. Move the router to an open space free from obstructions and make sure you have an available mobile network in your area. 3. If the problem persists, please contact your network service provider. Why is the but the indicator status steady on cyan, blue, or yellow, indicator is off? Your mobile network has poor reception.
9 Safety information This section contains important information about the operation of your device. It also contains information about how to use the device safely. Read this information carefully before using your device. Electronic device Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices.
information, consult the vehicle manufacturer. Do not place the device over the air bag or in the air bag deployment area in a motor vehicle. Doing so may hurt you because of the strong force when the air bag inflates. Wireless devices may interfere with the airplane's flight system. Do not use your device where wireless devices are not allowed according to the airplane company's regulations. Operating environment Avoid dusty, damp, or dirty environments. Avoid magnetic fields.
using it, power it off, and remove all cables connected to it. Then, contact an authorized service center. Observe local laws and regulations, and respect the privacy and legal rights of others. Do not block device openings. Reserve a minimum of 10 cm around the device to dissipate heat. Stop using your device or applications for a while if the device is overheated.
Please contact your retailer for information about the availability of approved accessories in your area. Power adapter safety The power plug is intended to serve as a disconnect device. For pluggable devices, the socket-outlet shall be installed near the devices and shall be easily accessible. Unplug the power adapter from electrical outlets and the device when not in use. Do not drop or cause an impact to the power adapter.
If the device is not going to be used for an extended period of time, power it off, and remove all cables connected to it. If anything unusual occurs (for example, if the device emits smoke or any unusual sound or smell), immediately stop using it, power it off, remove all cables connected to it, and contact an authorized service center. Do not trample, pull, or excessively bend any cable. Doing so may damage the cable, causing the device to malfunction.
improper handling, accidental breakage, damage, and/or improper recycling at the end of its life may be harmful for health and environment. For more information about where and how to drop off your EEE waste, please contact your local authorities, retailer or household waste disposal service or visit the website http://consumer.huawei.com/en/.
The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows: GSM 900:37 dBm, GSM 1800:34 dBm, LTE Band 7/28/38: 25.7 dBm, LTE Band 42/43: 26 dBm, Wi-Fi 2.4G:20 dBm.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
10 Legal Notice Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. and its affiliates ("Huawei"). The product described in this manual may include copyrighted software of Huawei and possible licensors.
Huawei reserves the right to change or modify any information or specifications contained in this manual without prior notice and without any liability. DISCLAIMER ALL CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL.
