LTE CPE User Manual

18
The frequency bands and transmitting power (radiated and/or conducted)
nominal limits applicable to this radio equipment are as follows: GSM 900:37
dBm, GSM 1800:34 dBm, LTE Band 7/28/38: 25.7 dBm, LTE Band 42/43: 26
dBm, Wi-Fi 2.4G:20 dBm.
Accessories and Software Information
It is recommended that the following accessories should be used:
Adapters: HW-120100X01 (X represents the different plug types used, which
can be either C, U, J, E, B, A, I, R, Z or K, depending on your region)
The product software version is 11.187.01.01.00. Software updates will be
released by the manufacturer to fix bugs or enhance functions after the
product has been released. All software versions released by the
manufacturer have been verified and are still compliant with the related
rules.
All RF parameters (for example, frequency range and output power) are not
accessible to the user, and cannot be changed by the user.
For the most recent information about accessories and software, please see
the DoC (Declaration of Confirmation) at
http://consumer.huawei.com/certification.
FCC Regulatory Compliance
FCC statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.