Mediapad M3 lite 10 User Guide (BAH-W09B_ 01_ UK)

Do not disturb mode
Do not disturb mode allows you to work or relax in peace and quiet. Your device will only notify
you about important calls or messages.
Call and messaging features are not supported on Wi-Fi only tablets.
1 Open Settings.
2 Touch Do not disturb and switch on Enable now.
3 Touch Do not disturb mode. You can:
l Configure the incoming call and message settings: Select Allow only priority
interruptions. Touch Define priority interruptions, and then touch Calls and Messages
to set the contact range from whom you want to receive calls or messages.
Selecting Whitelist only only sets the contact range. Select Whitelist for calls and
messages to set specific contacts.
l Enable alarm ringtones in do not disturb mode: Select Alarms only to only allow alarm
ringtones.
l Disable all inruptions: Select Don't interrupt to disable all ringtones and vibrations. The
screen will not turn on for incoming calls messages, or alarms.
l To enable do not disturb mode for a specific period, touch Time.
l To enable do not disturb mode for a specific event, touch Event.
Setting up an account
Adding an account
Add an email or social media account to sync your emails and messages to your device.
1 Open
Settings.
2 Touch Accounts > Add account. Select an account type and follow the onscreen
instructions to enter the account information.
l You must install the corresponding app before you can add a third-party account.
l For more information on adding email and company accounts, see Adding an email account.
Deleting an account
1 Open
Settings.
2 Touch Accounts and select an account type.
3 Select the account that you want to delete and follow the onscreen instructions.
System Features and Settings
68