MatePad User Guide-(BAH3-L09,HarmonyOS 2_01,en-gb)

Set the Battery Level Display Mode
You can also set whether or not to display the battery percentage in the status bar, and
whether to maintain a network connection when the device screen is turned o.
Display Battery Percentage on the Status Bar
Go to Settings > Battery (or Optimizer > ), touch Battery percentage, and choose to
display the battery percentage, either inside or outside of the battery icon on the status bar.
Stay Connected while Your Device is Sleeping
If you would like your device to continue to receive messages or download data while it is in
sleep mode, set to keep your device connected when it sleeps. Please note that this may
increase power consumption.
On the Battery screen, touch More battery settings, then enable or disable Stay connected
while asleep as required.
Storage
Check Storage Usage
Go to Settings > Storage to check storage usage and optimise it when you feel necessary.
Clean Up Device Storage
You can use Cleanup in Optimizer to scan for redundant or large
les, such as app residue,
unwanted installation packages, WeChat data, and more. Once detected, you can choose
whether or not to delete les as suggested.
1 Open Optimizer, then touch Cleanup.
2 When the scan is complete, touch Clean up after each item and delete any les you don't
need.
Automatically Clean Up System Trash
1 Open Optimizer, and touch Cleanup.
2 Swipe down from the top of the screen, and your device will automatically clean up
system trash.
Manually Clean Up System Trash
In addition to automatic cleanup, your device will also detect and recommend trash
les for
you to clean up manually.
On the Cleanup screen, touch Clean up next to a category, select the items you want to
clean up, then touch DELETE .
Settings
80