HUAWEI Band 4 User Guide Issue 01 Date 2019-10-23 HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2019. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.
HUAWEI Band 4 User Guide Contents Contents 1 Getting started................................................................................................................................1 1.1 Wearing your band..........................................................................................................................................................1 1.2 Adjusting or replacing the strap...........................................................................................................
HUAWEI Band 4 User Guide Contents 4.2 Sleep tracking............................................................................................................................................................... 25 4.3 Activity reminder..........................................................................................................................................................26 Issue 01 (2019-10-23) Copyright © Huawei Technologies Co., Ltd.
HUAWEI Band 4 User Guide 1 Getting started 1 Getting started 1.1 Wearing your band 1.2 Adjusting or replacing the strap 1.3 Pairing your band with your phone 1.4 Powering on/off and restarting the band 1.5 Charging your band 1.6 Icons 1.7 Controlling your band screen 1.8 Adjusting screen brightness 1.9 Setting the time zone and language 1.10 Viewing the Bluetooth name, MAC address, and Serial Number 1.11 Checking system information 1.12 Updating your band and the Huawei Health app 1.
HUAWEI Band 4 User Guide 1 Getting started The band strap adopts a U-shaped buckle design so it won't fall out easily. To wear the band, insert one end of the strap through the U-shaped buckle and then fasten it. The end of the strap is intentionally bent so as to enhance wearability. l Your band is made of materials that are safe to use. If you experience skin discomfort when wearing the band, stop using it and consult a doctor. l Be sure to wear your band properly to maximize comfort. 1.
HUAWEI Band 4 User Guide 1 Getting started l Installing the strap: Clip in the strap from the correct ends and directions. 1.3 Pairing your band with your phone When using your band for the first time, plug your band into a power source and it will automatically turn on. The band will enter Bluetooth pairing mode by default. Issue 01 (2019-10-23) Copyright © Huawei Technologies Co., Ltd.
HUAWEI Band 4 User Guide 1 Getting started l Your band can only be paired with phones running Android 4.4 or later, or iOS 9.0 or later. Make sure that you have enabled Bluetooth on your phone before starting pairing. l Once paired, the device's name will appear in the notification and the Settings' Bluetooth list. HWSynergy will appear under its name if it supports the feature. Your phone must be EMUI 8.0 or later to use it. l For Android users: a.
HUAWEI Band 4 User Guide 1 Getting started When you turn on your band for the first time or pair it after a factory reset, you'll be prompted to select a language before pairing. After your band is paired with your phone, your band will display the language that set on your phone. to confirm d. Your band will vibrate when it receives a pairing request. Touch pairing. e. Once your phone displays the Bluetooth pairing request, touch PAIR to begin pairing. 1.
HUAWEI Band 4 User Guide 1 Getting started l Before charging, make sure that the charging port and metal parts are clean and dry to prevent short circuiting or any other risks. l If the band screen flickers or goes black, connect it to a power source to restart the band. l Use a Huawei charger with a rated output voltage of 5 V and a rated output current of 1 A or above or a computer to charge your band. Using a non-Huawei charger may be slower and could cause your band to heat up.
HUAWEI Band 4 User Guide 1 Getting started To ensure battery safety, the charging current will be decreased substantially when the ambient temperature is too low. This means it will need longer to charge. It is recommended that you charge your band in an environment with an ambient temperature higher than 20°C. Checking the battery level: l If the screen is on, just tap the screen to check the battery. l Alternatively go to More > Battery to check it.
HUAWEI Band 4 User Guide 1 Getting started Activity record Heart rate Sleep Workout Messages More The percentage displayed under Daily tracking indicates your progress towards your goal. Activity records: Step count Calories burned Moderate to high intensity activity Times standing Distance - Workout modes: Outdoor cycle requires GPS and EMUI 5.0 or later (or iOS 9.0 or later). The Outdoor Cycle icon will be hidden on your band if your phone does not meet these requirements.
HUAWEI Band 4 User Guide 1 Getting started Bluetooth not connected Bluetooth connected Connect with Bluetooth First-time pairing request Pairing Paired Low battery Critically low battery Activity reminder Updating Failed to update Decompressing Alarm Find phone Battery: Charging Others: Issue 01 (2019-10-23) Copyright © Huawei Technologies Co., Ltd.
HUAWEI Band 4 User Guide 1 Getting started Unread messages Take photos Confirm Cancel End Pause Start - - Weather: Issue 01 (2019-10-23) Sunny Cloudy Overcast Showers Thunder storms Hail storms Light rain Rain Severe rain storms Snow flurries Light snow Snow Heavy snow Snow storms Dust storms Dust Sand Sand storms Smog No data Copyright © Huawei Technologies Co., Ltd.
HUAWEI Band 4 User Guide 1 Getting started Fog Freezing rain Heavy rain Heavy rain storms 1.7 Controlling your band screen Your band has a full screen touchscreen and can detect up, down, and right swipes, as well as when you touch and hold the screen. It works with the Home key to make using your band even easier. Steps Function Notes Touch the Home key when the screen is on Return to the home screen There are certain cases such as during workouts or calls where this won't work.
HUAWEI Band 4 User Guide 1 Getting started l You can enable Raise wrist to wake screen in the Huawei Health app. l The maximum length of time that the screen of your band can stay on is 5 minutes. To extend the length of time that the screen stays on time, do the following: go to More > Screen on and then enable Screen will sleep after 5 min. Now the screen will automatically turn off after five minutes these changes are temporary. You will need to extend the time again after you wake the screen.
HUAWEI Band 4 User Guide 1 Getting started 1.10 Viewing the Bluetooth name, MAC address, and Serial Number Viewing the Bluetooth name: Method 1: Connect the band to your phone using the Huawei Health app. The device name displayed in the app is the name that will be displayed when using Bluetooth. Method 2: On your band, go to More > System > About, the device name displayed on the band screen, this is the name that you will see when using Bluetooth.
HUAWEI Band 4 User Guide 1 Getting started l For Android users: Open the Huawei Health app. Touch Devices, then your device name, enable Auto-update device over Wi-Fi. If an update is available, a notification will pop up on your band. Follow the onscreen instructions to update your band. l For iOS users: Open the Huawei Health app and touch the profile picture in the upper left corner. Touch Settings and enable Auto-update device over Wi-Fi.
HUAWEI Band 4 User Guide 2 App management 2 App management 2.1 Message reminders 2.2 Viewing messages 2.3 Deleting messages 2.4 Incoming calls 2.5 Remote photo shooting 2.6 Using Stopwatch 2.7 Setting a Timer 2.8 Setting an alarm 2.9 Syncing an alarm from your phone 2.10 Weather reports 2.11 Finding your phone using the band 2.12 Changing watch faces 2.1 Message reminders Enable notifications Once enabled, the band can sync messages displayed in the phone's status bar to your band.
HUAWEI Band 4 User Guide 2 App management following: Go to Settings > Apps & notifications > Notifications management, touch the app for which you want to receive notifications, and enable Allow notifications and Display in the status bar. 4. For iOS users: Open the Huawei Health app, touch Devices then your device name. Enable Notifications. Turn on the switch for apps for which you want to receive notifications.
HUAWEI Band 4 User Guide 2 App management inform you of any incoming messages during a set period. The Raise wrist to wake screen will also be unavailable when Do not disturb is enabled. To avoid missing important messages, it is recommended that you do not enable Do not disturb mode. Your band will only receive and will not push any notifications when it is in Do not disturb mode or Sleep mode. Swipe in any direction on your band's home screen (except to the left) to view new messages. 2.
HUAWEI Band 4 User Guide 2 App management If you do not perform any operation during an incoming call, your band will display a message to notify you of the missed call. Swipe right on the home screen to clear the message. l The band screen will remain on when notifying you of an incoming call. l Your band can mark an unknown number. This feature is available only when the band is paired with a phone running EMUI 4.0 or later.
HUAWEI Band 4 User Guide 2 App management 1. Touch More and then select Stopwatch. 2. to start timing. The stopwatch can count up to "59:59.9". Once it hits Touch that number it will stop on its own. 3. While Stopwatch is running, you are able to: – Touch to stop timing. – Touch to resume timing. – Touch – Swipe right to return to More screen without stopping timing. to end timing and reset the stopwatch to "00:00.0". 2.
HUAWEI Band 4 User Guide 2 App management The Smart alarm feature is only available when HUAWEI TruSleepTM is not enabled. l The Event alarm will always go off at the specified time. If you set a tag for the Event alarm, the band will display the tag. Otherwise, only the time will be displayed. For Android users: 1. Open the Huawei Health app, touch Devices, touch your device, and then go to Alarm > SMART ALARM or Alarm > EVENT ALARMS. 2.
HUAWEI Band 4 User Guide 2 App management For users having phones running a version earlier than EMUI 9.0, Select Use GPS, WLAN，and mobile networks, or Use WLAN and mobile networks for the positioning mode instead of Use GPS only. l If it has been set up successfully, you will see the weather and temperature displayed on your band. If it is unable to sync, they will not appear.
HUAWEI Band 4 User Guide 3 Professional workouts 3 Professional workouts 3.1 Starting a workout 3.2 Recording daily activity data 3.1 Starting a workout 1. Swipe up or down on the band's home screen to find the Workout screen. 2. Swipe up or down on the screen to select a workout type. The following workout modes are supported on the band, Outdoor run, Indoor run, Outdoor walk, Indoor walk, Outdoor cycle, Indoor cycle, Elliptical, Rower, and Other.
HUAWEI Band 4 User Guide 3 Professional workouts – Touch to end the workout and view your fitness data. l If the workout distance is less than 100 meters, it will not be recorded. l The workout will not be recorded if it lasts for less than 1 minute when you are using Outdoor cycle, Indoor cycle, Other, Elliptical, or Rower mode. l Make sure to touch the end icon after you're finished with a workout, to prolong battery life.
HUAWEI Band 4 User Guide 4 Health and fitness 4 Health and fitness 4.1 Measuring heart rate 4.2 Sleep tracking 4.3 Activity reminder 4.1 Measuring heart rate Measuring your heart rate manually 1. Keep your arm still and make sure your band is on correctly. 2. Swipe up or down on the home screen until you find Heart rate. 3. Tap it to start measuring your heart rate, and check your current heart rate. 4.
HUAWEI Band 4 User Guide 4 Health and fitness Huawei Health app ("220 – your age" by default), your band will vibrate to notify you. Touch the Home key or swipe right on the screen to dismiss the alert. After completing your workout, you can check your average heart rate, maximum heart rate, and heart rate zone from the workout on the results screen.
HUAWEI Band 4 User Guide 4 Health and fitness The band adopts HUAWEI TruSleepTM sleep tracking technology to accurately detect whether you are in a deep sleep, light sleep, REM sleep (rapid eye movement), or awake, and provide you with sleep quality assessments and suggestions for improving the quality of your sleep. Enabling TruSleep may slightly reduce your band's battery life. 4.
