User manual

More guidance
Do Not Disturb
Swipe down on the watch's home screen and touch to enable Do Not Disturb mode.
Alternatively, on your watch, go to Settings > Do Not Disturb. You can set it to all day or
schedule a time period for this mode.
After Do Not Disturb is enabled:
• Messages and notications will not be displayed on the watch, and the Raise to wake
feature will be disabled.
• The alarm will vibrate and ring as normal.
Setting vibration strength
On the watch, go to Settings > Strength, then select your preferred vibration strength level,
such as Strong, Soft, or None. Your watch will then automatically return to the previous
screen.
Turning the screen on and o
Using Raise to wake: Open the Huawei Health app, go to the device settings screen, enable
or disable Raise to wake.
Adjusting the screen brightness level: On your watch, go to Settings > Display >
Brightness, and set your preferred screen brightness level.
Setting Always on Display: On your watch, go to Settings > Display > Advanced, and set
the screen on time to 5 min, 10 min, 15 min, or 20 min. After it is set, swipe down on the
home screen of the watch, touch . The screen will then stay on for the amount of time
you set.
Setting Sleep time: On your watch, go to Settings > Display > Advanced and set the screen
sleep time to 10 sec, 15 sec, or 20 sec. If Sleep is set to Auto, the watch screen will turn o
when you tilt or lower your wrist.
If you turn the screen back on within 10 seconds of it turning o, the previous screen will
be displayed. Otherwise, the home screen will be displayed.
Setting the time zone and language
When you turn on your watch for the rst time or pair it with your phone after a factory
reset, you will be prompted to select a language before pairing. After both devices are paired,
the language on your watch will be the same as the language on the phone. If you change
16