EchoLife BM325 WiMAX USB Modem Quick Start
Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129, People's Republic of China Website: http://www.huawei.com E-mail: terminal@huawei.com Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co.
Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers, thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation.
Before you begin............................................ 1 02 Getting to Know Your USB Modem.................... 1 03 Requirements on PC Configuration.................... 2 04 Connecting the External Antenna (Optional)....... 3 05 Installation Guide........................................... 3 06 Setting Up a PPP Dial-Up Connection................. 5 07 Connecting and Disconnecting a Network........... 6 08 Troubleshooting............................................. 8 09 Specifications.
01 Before you begin Check the following items in the product package. If you find anything missing or damaged, contact the service provider. • USB Modem • USB Cable • Quick Start • Qualification Card 02 Getting to Know Your USB Modem The supported functions and actual appearance are subject to your product purchased. The following pictures are displayed for illustration purpose only.
Indicator Status Description On The USB Modem is powered on. Blinks once per second The USB Modem accesses the network normally. No data, however, is being transmitted. The USB Modem is transmitting data. The larger the amount of transmitted data is, the higher the blinking speed is. Blinks Off 03 The USB Modem is powered off. Requirements on PC Configuration Your PC must meet the following configuration requirements for using the USB Modem.
04 Connecting the External Antenna (Optional) 䇈ᯢ • Do not use the external antenna outdoors. • During lightning storms, stop using the external antenna and disconnect it from the USB Modem. To connect the external antenna to your USB Modem, do as follows: a. Power off the USB Modem. b. Pull out the plastic plug on the side of the USB Modem and connect the external antenna to the USB Modem. It is recommended that you connect the external antenna to the interface not close to the USB port. c.
䇈ᯢ • Use the delivery-attached cable. A USB extension cable or an extra-long USB cable may cause shortage of power supply, thus making the device unserviceable. • During lightning storms, stop using the USB modem and disconnect it from the computer. Installing the Management Program a. b. c. d. e. Power on the PC. Connect the USB Modem to the PC by using the USB cable. The OS displays a message that new hardware is found and prompts you to install the management program.
d. e. Choose Uninstall. Uninstall the management program according to the on-screen instructions. Method two: a. Exit the management program. b. Choose Start > Control Panel > Add/Remove Programs. c. Click Change/Remove Programs. d. Find the management program. e. Click Change/Remove. f. Uninstall the management program according to the on-screen instructions. 䇈ᯢ After the management program is uninstalled, restart the PC to ensure complete removal of the management program from the PC.
If the USB Modem accesses the Internet through a Point-to-Point Protocol (PPP) dial-up connection, you need to set up a PPP dial-up connection after installing the management program. To set up a PPP dial-up connection on the Windows OS, do as follows: a. Choose Start > Control Panel > Network Connection. b. Under Network Tasks in the left pane, click Create a new connection. c. Click Next in the displayed New Connection Wizard dialog box. d. Select Connect to the Internet and then click Next. e.
c. d. account. Click Connection. Click Connect Network. Then the USB Modem tries to connect to the network. When the connection is established, the icons indicating a successful network connection and the signal strength are displayed at the bottom of the management program window. Disconnecting a Network When you do not use the Internet, you can disconnect the USB Modem from the network manually.
08 Troubleshooting The Management Program cannot start automatically after the installation. When the USB Modem is connected to the PC for the first time, the system does not prompt you to install the Management Program. • After the system recognizes the new hardware, you need to wait a few minutes for the system to prepare for the installation of the program. • Ensure that the USB Modem is connected to the PC correctly and is displayed in the notification area.
The USB Modem cannot access the Internet. • Ensure that you are in the service area. • Ensure that the USB Modem is connected to the PC correctly and the management program is installed correctly. • Ensure that you have subscribed to the Internet access service. Contact your local ISP for how to subscribe to the service. When you power on the PC after the USB Modem is connected, the Windows OS hangs.
09 Specifications Physical Interface USB interface USB 2.0 WiMAX parameters Standard IEEE 802.16e-2005 Frequency 2.496–2.
10 Warnings and Precautions To use the device properly and safely, read these warnings and precautions carefully and strictly observe them during operation. Basic Requirements � During storage, transportation, and operation of the device, keep it dry and prevent it from colliding with other objects. � Do not dismantle the device. In case of any fault, contact an authorized service center for assistance or repair.
Accessory Requirements Use only the accessories supplied or authorized by the device manufacturer. Otherwise, the performance of the device may get affected, the warranty for the device or the laws and regulations related to telecommunications terminals may become null and void, or an injury may occur. Safety of Children Keep the device and its accessories out of the reach of children.
Reduction of Hazardous Substances This device is compliant with the EU Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) Regulation (Regulation No 1907/2006/EC of the European Parliament and of the Council) and the EU Restriction of Hazardous Substances (RoHS) Directive (Directive 2002/95/EC of the European Parliament and of the Council). For more information about the REACH compliance of the device, visit the Web site www.huaweidevice.com/certification.
� Lietuviškai: Šiuo Huawei Technologies Co., Ltd. praneša, kad šis įtaisas atitinka Direktyvos 1999/5/EC pagrindinius reikalavimus ir taikomas sąlygas. � Malti: Hawnhekk, Huawei Technologies Co., Ltd. tiddikjara li dan it-tagħmir hu konformi mal-ħtiġijiet essenzjali u provvedimenti rilevanti oħrajn ta’ Direttiva 1999/5/KE. � Polski: Wymieniona w tym dokumencie firma Huawei Technologies Co., Ltd.
Huawei Technologies Co., Ltd. Huawei Industrial Base Bantian, Longgang Shenzhen 518129, People's Republic of China www.huawei.
