Owner's Manual

4 Configuring Advanced Functions
EchoLife BM635
User Guide
4-8 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Issue 01 (2008-06-15)
Adding a MAC Filter Rule
Step 1
In the navigation tree, choose
Advanced
>
Security
, and then click the
MAC Filter
tab.
Step 2
Select
Enable MAC Filter
to enable the MAC filter.
Step 3
Select
Black
or
White
.
Step 4
Click
New
.
Step 5
Set the following parameters of the MAC filter rule.
Parameter Description
Filter Name It indicates the MAC filter rule name.
Source MAC
Address
It indicates the source host MAC address.
Destination MAC
Address
It indicates the destination host MAC address.
Start Time It indicates the effective time of a rule, in the format of hh: mm.
End Time It indicates the expiration time of a rule, in the format of hh: mm.
Day It indicates the effective date of a rule.
Enable It indicates whether to use this rule.
Step 6
Click
Apply
.
----End
Modifying a MAC Filter Rule
Select a MAC filter rule to be modified, modify it, and then click Apply.
Deleting a MAC Filter Rule
Select the MAC filter rule to be deleted, and then click Remove.
4.5.3 Configuring an IP Incoming Filter
When the firewall is enabled, the IP incoming filter can be used to receive certain
specified IP packets at the WAN side.
Adding an IP Incoming Filter Rule
Step 1
In the navigation tree, choose
Advanced
>
Security
, and then click the
IP Incoming
tab.
Step 2
Select
Enable IP Incoming Filter
to enable the IP incoming filter.
Step 3
Click
New
.
Step 4
Set the following parameters of the IP incoming filter rule.