Owner's Manual

EchoLife BM635

User Guide

4 Configuring Advanced Functions

Issue 01 (2008-06-15) Huawei Proprietary and Confidential

4-9

Parameter Description

Filter Name It indicates the name of an IP incoming filter rule.

Protocol It indicates a protocol type.

Enable It indicates whether to use this rule.

Source Start

Address

It indicates the start IP address of the source host.

Source End

Address

It indicates the end IP address of the source host.

Source Start Port It indicates the start port number of the source host.

Source End Port It indicates the end port number of the source host.

Destination Start

Address

It indicates the start IP address of the destination host.

Destination End

Address

It indicates the end IP address of the destination host.

Destination Start

Port

It indicates the start port number of the destination host.

Destination End

Port

It indicates the end port number of the destination host.

Interface It indicates the interface type.

Step 5

Click

Apply

----End

Modifying an IP Incoming Filter Rule

Select an IP incoming filter rule to be modified, modify it, and then click Apply.

Deleting an IP Incoming Filter Rule

Select the IP incoming filter rule to be deleted, and then click Remove.

4.5.4 Configuring an IP Outgoing Filter

The IP outgoing filter is used to prevent the LAN side from sending certain IP packets.

The configuration of an IP outgoing filter rule is the same as that of an IP incoming filter

rule. For detailed parameter settings, see section 4.5.3 "Configuring an IP Incoming

Filter"