Quick Start Manual

ManualsBrandsHuawei ManualsModemsHuawei BM635

Troubleshooting Legal Notice

Issue: 02 (2009-10-10)

Part Number: 00405272

EchoLife BM635 WiMAX CPE

8 9

Quick Start

Conﬁguring the VoIP Service

Viewing the Status Information about the CPE

The status information about the CPE includes the device information, Wide Area Network

(WAN) information, LAN information, VoIP information, and WiMAX information.

The device information includes the product class, device ID, software version, hard-

ware version, WAN Medium Access Control (MAC) address, LAN MAC address, and

WLAN MAC address.

The WAN information includes the connection status, IP address, subnet mask, default

gateway, and Domain Name Server (DNS).

The LAN information includes the LAN host IP address, status about each LAN port,

and Wireless Local Area Network (WLAN) status.

The VoIP information includes the SIP ID and the register status.

The WiMAX information includes the network connection status, the signal strength,

and other information.

Perform the following steps to view the status information:

Logging in to the Web page of the CPE.

Expand the

Status

navigation tree and select the tab to view the corresponding sta-

tus information.

•

Users can make calls using the CPE through the Voice over IP (VoIP) service. Perform the

following steps to conﬁgure the VoIP service:

Choose

Basic

VoIP

, and then click the

SIP User

tab.

Enter the new ID in the

SIP ID

text box.

Enter the user name and password provided by the service provider correctly.

Enter the port number in the

SIP Local Port

text box.

Select the correct caller number display type.

Select whether to enable message waiting indication. When you enable the function,

you need to enter the Uniform Resource Identiﬁer(URI) in the

Message Waiting In-

dication Service Subscribe URI

text box, and then save the settings.

Click the

SIP Server

tab.

Select the server type. Two options are available: primary server and secondary serv-

er.

Enter the address and port number of the SIP proxy server and SIP registrar server

respectively.

Enter the domain name of the SIP service and save the settings.

After the conﬁguration, you need to restart the CPE to validate the VoIP service. After the

restart, you can make calls by connecting your phone to the CPE.

10.

11.

Setting the User Account

After logging in to the Web page of the CPE, you can change the user account. Do not

forget the new account. Perform the following steps to set the user account:

Choose

Maintain

Account

, and click the

Account

tab.

Enter the old password.

Enter the new username, the new password and conﬁrm the new password.

Click

Apply

Speciﬁcations

Advanced Operations

The POWER indicator is off.

Ensure that the device is powered on.

Ensure that the power adapter is compatible with the device.



You cannot make calls.

Ensure that the telephone is working normally and the telephone line is

connected properly.

Ensure that the VoIP service is conﬁgured correctly. For details, see

Con-

guring the VoIP Service

on page 6.

If the problem persists, contact the local service provider.



You cannot log in to the Web page.

Ensure that the device is powered on.

Ensure that the network cable connecting the device and the PC is in good

condition.

Ensure that the parameters are set correctly. For details, see

Logging in

to the Web page

on page 5.

If the problem persists, contact the local service provider.



The WiMAX network cannot be searched.

Ensure that the antennas are correctly connected.

Ensure that the device is powered on.

Ensure that the device is kept in an open space where it is away from ob-

stacles like concrete or wooden walls.

Ensure that the device is kept away from any household appliance that

emits strong electric ﬁeld or magnetic ﬁeld, such as a microwave oven, a

refrigerator, or a satellite dish antenna.

If the problem persists, contact the local service provider.



The device or power adapter gets heated.

After being used for a long time, the device may heat up. Power off the

device when it is not in use.

Place the device in a well-ventilated place. Do not expose the device to

direct sunlight.



Speciﬁcations

Item Sub-item Speciﬁcations

WiMAX

parameters

Standard IEEE 802.16e-2005

Frequency 3.4–3.6 GHz

Port

LAN Four Fast Ethernet (FE) ports

TEL Two Plain Old Telephone Service (POTS) ports

Wi-Fi

parameters

Frequency 2.4–2.4835 GHz

Working mode IEEE 802.11b/g, IEEE 802.11b, and IEEE 802.11g

Other

parameters

Power adapter input 100–240 V AC

Power consumption 12 W

Power supply to device 12 V DC，2 A，2 A2 A

Working environment

temperature

0℃ to 40℃ (32 ℉ to 104 ℉ )

Working environment

humidity

5% to 95% (non-condensing)

Dimensions (L×W×H) 188 mm ×158 mm × 34 mm (without the base)

Weight < 400 g

No part of this document may be reproduced or transmitted in any form or by any means without

prior written consent of Huawei Technologies Co., Ltd.

The product described in this manual may include copyrighted software of Huawei Technologies Co.,

Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decom-

pile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software,

unless such restrictions are prohibited by applicable laws or such actions are approved by respective

Trademarks and Permissions

, HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd.

Other trademarks, product, service and company names mentioned are the property of their respec-

tive owners.

Notice

Some features of the product and its accessories described herein rely on the software installed, ca-

pacities and settings of local network, and may not be activated or may be limited by local network

operators or network service providers, thus the descriptions herein may not exactly match the prod-

uct or its accessories you purchase.

Huawei Technologies Co., Ltd reserves the right to change or modify any information or speciﬁcations

contained in this manual without prior notice or obligation.

No Warranty

THE CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE

LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,

ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECH-

NOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAM-

AGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.

Import and Export Regulations

Customers shall comply with all applicable export or import laws and regulations and will obtain all

necessary governmental permits and licenses in order to export, re-export or import the product men-

tioned in this manual including the software and technical data therein.

If you forget your password, please restore the default settings to resume the initial password. You

can also contact the local service provider for help.

Summary of content (2 pages)

PAGE 1
Advanced Operations 1 6 Conﬁguring the VoIP Service Users can make calls using the CPE through the Voice over IP (VoIP) service. Perform the following steps to conﬁgure the VoIP service: 1. Log in to the Web page of the CPE. 2. Choose Basic > VoIP, and then click the SIP User tab. 3. Enter the new ID in the SIP ID text box. 4. Enter the user name and password provided by the service provider correctly. 5. Enter the port number in the SIP Local Port text box. 6.
PAGE 2
Warnings and Precautions 1 To use the device properly and safely, read these warnings and precautions carefully and strictly observe them during operation. NOTE: Unless otherwise speciﬁed, the device described in this section includes the device and its accessories. Basic Requirements • • • • Areas with Inﬂammables and Explosives WiMAX Indicator Keep the device and its accessories out of the reach of children.