Tattoo SuperStick Postpaid Mobile Broadband User Guide
Thank you for choosing Tattoo SuperStick Postpaid Mobile Broadband! With your Tattoo Postpaid Kit, you can access the internet anytime, anywhere! This guide will help you live without limits with Tattoo! Table of Contents: The Tattoo Postpaid Kit System Requirements Getting to Know Your Tattoo Postpaid Kit Preparations Accessing the Internet Via Wi-Fi Connection Accessing the Web Management Page Enabling a WPS Connection Restoring Factory Defaults Web Management Page Interface SMS Feature 1 2 4 4 6 8 10 12
The Tattoo Postpaid Kit includes: 1. 2. 3. 4.
Scenario 1: Multi-device access via Wi-Fi Smart phone Game machine Digital camera Laptop Scenario 2: One-device access via USB 3
System Requirements Operating System: Windows XP SP2/SP3, Windows Vista SP1/SP2, Windows 7; Mac OS X 10.5, 10.6 and 10.7 with latest upgrades Getting to Know Your Tattoo Postpaid Kit 1. 2. 3. 4. 5. 6. 7.
Screen 1 1. Signal Strength 2. Network 3. Wi-Fi Enabled / Number of device connected 4. Internet Connection Status 5. New Messages / Number of New Messages 6. Battery Level 7. International Roaming State 8.
Preparations Installing the SIM Card and the Battery 1 3 2 Installing the microSD card 1. Remove the rubber cap from the microSD card slot and insert the microSD card 2.
Charging the Battery Method 1: Using the charger Caution: Only use chargers compatible with the Tattoo SuperStick and provided by a designated manufacture Method 2: Charging by Connecting to a PC Connect the device to a PC using a compatible data cable 7
Accessing the Internet via Wi-Fi Connection • Power on the Tattoo SuperStick • Establish a Wi-Fi Connection For Windows XP: o Enable Wi-Fi function o Select Start > Control Panel > Network Connections > Wireless Connections then click View Available Wireless Networks o Select the wireless network whose SSID is the same as that of the Tattoo SuperStick and click connect Note: The SSID and key label are printed on the device • Access the internet 8
After you establish a Wi-Fi connection successfully, please select the proper internet connection mode from the following modes: Mode Automatic Manual Operations After the Tattoo SuperStick is powered on, it will connect to the Internet automatically if data transmission is required. If there is no data transmission over a period of time, the Tattoo SuperStick automatically terminates the Internet connection.
Accessing the Web Management Page 1. Make sure that the connection between the Tattoo SuperStick and the client is a proper one. 2. Start the Internet browser and enter http://192.168.1.1 in the address bar. 3. Enter the password and log in to the web management page. Note: The default password is admin. Validating the PIN Code If PIN code protection is enabled, log in to the web management page and follow the prompts to enter the correct PIN code. Both PIN and PUK are delivered with the SIM card.
Power Saving Mode If no operation is performed on the Tattoo SuperStick within a preset period, the screen turns off. Press any key to light up the screen. If the Tattoo SuperStick is powered by the battery only, choose whether to enable the Tattoo SuperStick to turn off Wi-Fi automatically. If this function is enabled and no Wi-Fi devices access the Tattoo SuperStick for a preset period, the Tattoo SuperStick turns off Wi-Fi automatically. You can press any key to turn on Wi-Fi again.
Establishing a WPS Connection If a Wi-Fi client connected to the Tattoo SuperStick supports the WPS function, a network key will be automatically generated without manual input. To establish a WPS connection, perform the following steps: 1. Power on the Tattoo SuperStick 2. Start the client 3. Hold the WPS function to enable the WPS function of the Tattoo SuperStick 4.
Restoring Factory Defaults If you forget the changes you have made to some parameters, you may restore factory defaults and reconfigure the Tattoo SuperStick. To restore the factory defaults, press and hold the RESET button until the screen turns off. All factory default settings are successfully restored.
Web Management Page Interface Legend: 1. Connection information 2. Send or receive SMS 3. Allows you to setup configurations 4. Notification area 5. Shows the signal strength 6. Shows signal type 7. Shows connection, upload and download speed 8. Allows you to indicate if your service is postpaid 9.
15
16
17
SMS Features Maximize the features of Tattoo Postpaid Kit! • Send and receive SMS • Store messages in your inbox • Forward messages • Check and reload your account balance without internet for free 18
19
20
Example 1: Wi-Fi Connection to Game Machine (Sony PSP) 1. Turn on the PSP WLAN switch. 2. Select Settings > Network Settings. 3. Select Infrastructure Mode to connect to your local Wi-Fi access point. 4. Select New Connection to specify an easy to remember connection name. 5. Select Scan to detect all networks within range. The access point list is displayed.
6. Select a network indicated by the SSID of the Tattoo SuperStick. First press the ► button of your game machine to confirm the SSID and then press it again to input the Wi-Fi key. • SSID: The Wi-Fi name of the Tattoo SuperStick. • WEP: The Wi-Fi key of the Tattoo SuperStick. • The default SSID and key label are affixed to the Tattoo SuperStick.
7. Press the ► button of your game machine to continue, and then press the X button to save the settings. 8. Select Test Connection to check the connection. 9. Go to Internet Browser.
Example 2: Wi-Fi Connection to a Smart Phone (iPhone) 1. Select Settings > Wi-Fi, and then turn on Wi-Fi. 2. Automatically detect the networks in range and display the access point list. 3. Select a network indicated by the SSID of the Tattoo SuperStick. 4. If necessary, enter a password and tap Join. (Networks requiring a password appear with a lock icon.) Note: Some Wi-Fi clients such as iTouch, PS3 and NDSi can also access the Internet via the Tattoo SuperStick.
For more information, visit tattoo.globe.com.