Quick Start Manual

ManualsBrandsHuawei ManualsComputer PartsHuawei EC1270

Thank you for choosing the iFox CDMA 311A USB Slider

Modem. With your USB Slider, you can access a wireless

network at high speed.

Note:

This manual describes the appearance of the USB Slider, as well as the procedures for

preparation, installation, and removal. For operation details about the management

program, see the online help included in the management program.

Getting to Know Your iFox CDMA 311A USB Slider Modem

The following figure shows the appearance of the USB Slider. It is provided only for your

reference. The actual product may be different.

Summary of content (8 pages)

PAGE 1
Thank you for choosing the iFox CDMA 311A USB Slider Modem. With your USB Slider, you can access a wireless network at high speed. Note: This manual describes the appearance of the USB Slider, as well as the procedures for preparation, installation, and removal. For operation details about the management program, see the online help included in the management program. Getting to Know Your iFox CDMA 311A USB Slider Modem The following figure shows the appearance of the USB Slider.
PAGE 2
1 2 5 3 4 n USB Connector It connects the USB Slider to a PC. o Slider It extends or retracts the USB connector. p Indicator It indicates the status of the USB Slider.
PAGE 3
z z z z Solid: The USB Slider is powered on. Blinking once every 2s: The USB Slider is searching for a network or no network is found. Blinking twice every 2s: The USB Slider finds a network. Blinking once every 0.2s: The USB Slider is transmitting data. q UIM Card Slot It holds a User Identity Module (UIM) card. r MicroSD Card Slot It holds a microSD card. Getting Your iFox CDMA 311A USB Slider Modem Ready Installing the UIM and mircoSD Card 1. Slide the back cover to remove it from the USB Slider. 2.
PAGE 4
the following figure. 3. Replace the back cover and slide it into place. Note: z The microSD card is an optional accessory. If it is not provided in the package, you can buy one yourself. z Ensure that the beveled edge of the UIM card is properly aligned with that of the UIM card slot and the microSD card is inserted according to the direction as labeled on the microSD card slot. z Do not remove the microSD or UIM card when the card is in use.
PAGE 5
well as your USB Slider may get damaged and the data stored on the card may be corrupted. Preparing Your Front Cover 1. Open the front cover of the USB Slider by lifting the cover at the point indicated by the arrow in the left diagram below. 2. Insert your favourite front cover into the slots at the edge of the USB Slider as shown below. Press the front cover until it clicks into place.
PAGE 6
Installation/Removal Guide The procedure for installing the management program depends on the operating system (OS) installed on your PC. The following sections take Windows XP as an example. Connecting the USB Slider to a PC Push the slider on the side of the USB Slider to fully extend the USB connector. Then plug the USB Slider into the USB port of your PC.
PAGE 7
Installing the USB Slider Management Program 1. Connect the USB Slider with the PC. 2. The OS automatically detects and recognizes the new hardware and starts the installation wizard. Note: If the auto-run program does not respond, find the AutoRun.exe file in the driver path. Then double-click AutoRun.exe to run the program. 3. Follow the on-screen instructions of the installation wizard. 4. After the program is installed, a shortcut icon for the management program appears on the desktop.
PAGE 8
Removing the USB Slider 1. Double-click in the notification area. Then the Unplug or Eject Hardware dialog box appears. 2. Select the corresponding hardware and then click Stop. 3. When the message "It is safe to remove the device" appears, remove the USB Slider. Uninstalling the Management Program 1. Choose Start > Control Panel > Add or Remove Programs. 2. Find the management program and click Remove to uninstall the management program. Note: Exit the management program before uninstalling it.