Echolife WS311 Wireless Ethernet-Adapter Benutzerhandbuch HUAWEI TECHNOLOGIES CO., LTD.
HUAWEI WS311 Wireless Ethernet Adapter V100R001 Benutzerhandbuch Ausgabe 01 Datum 2011-01-19 Teilenummer 202486 Huawei Technologies Co. Ltd. bietet seinen Kunden umfassende technische Unterstützung und Service. Wenden Sie sich bitte an unsere Niederlassung oder den Hauptsitz. Huawei Technologies Co., Ltd. Adresse: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 Volksrepublik China Website: http://www.huawei.com E-Mail: terminal@huawei.
Copyright © Huawei Technologies Co., Ltd. 2012. Alle Rechte vorbehalten. Kein Teil dieses Dokuments darf ohne vorherige schriftliche Zustimmung von Huawei Technologies Co., Ltd. vervielfältigt oder in irgendeiner Form übertragen werden. Das in diesem Handbuch beschriebene Produkt kann urheberrechtlich geschützte Software der Huawei Technologies Co., Ltd. und/oder anderen Lizenzgebern enthalten.
Import- und Exportbestimmungen Die Kunden müssen alle geltenden Aus- und Einfuhrgesetze und -richtlinien einhalten und sind für die Einholung der erforderlichen behördlichen Genehmigungen und Lizenzen für Ausfuhr, Wiederausfuhr oder Einfuhr des in diesem Handbuch genannten Produkts verantwortlich, einschließlich der darin enthaltenen Software und technischen Daten.
Inhalt 1 Warnungen und Sicherheitsmaßnahmen .................................................... 1 Grundanforderungen ................................................................................................. 1 Ökologische Anforderungen für die Verwendung des Geräts............................................... 1 Vorsichtsmaßnahmen bei der Verwendung von Wireless-Geräten ............................ 2 Gebiete mit entflammbarem und explosivem Material ..............................................
1 Warnungen und Sicherheitsmaßnahmen Vielen Dank für den Kauf des Echolife WS311 Wireless Ethernet-Adapters (im Folgenden WS311 bezeichnet). Für den richtigen Umgang mit dem Gerät lesen Sie sorgfältig diese Warnungen und Vorsichtsmaßnahmen und beachten Sie sie während des Betriebs. Sofern nicht anders angegeben, bezieht sich der Begriff „Gerät“ auf den WS311 und sein Zubehör.
Stellen Sie keine Objekte (z. B. eine Kerze oder einen Wasserbehälter) auf das Gerät. Wenn ein Fremdkörper oder Flüssigkeiten in das Gerät kommen, stellen Sie die Benutzung sofort ein, schalten Sie es ab und entfernen Sie alle Kabel. Dann wenden Sie sich an ein autorisiertes Service-Center. Schalten Sie das Gerät bei Gewitter aus und entfernen Sie alle verbundenen Kabel, um Schäden durch Blitzschlag zu verhindern.
Stellen Sie sicher, dass das Netzteil die Anforderungen der Klausel 2.5 IEC60950-1/EN60950-1 erfüllt und es gemäß nationalen oder lokalen Normen getestet und zugelassen ist. Sicherheit von Kindern Halten Sie das Gerät und sein Zubehör außerhalb der Reichweite von Kindern. Andernfalls können das Gerät und sein Zubehör versehentlich beschädigt werden oder Kinder können die kleinen Komponenten des Gerätes verschlucken, ersticken oder andere gefährliche Situationen verursachen.
2 Kennenlernen des WS311 Einführung in den WS311 Der WS311 funktioniert als Slave in einem Drahtlosnetzwerk. Durch die Integration der Funktionen eines drahtlosen Clients können sie drahtlose Verbindungen für die Endgeräte wie IP-Set-Top-Boxen (STBs) und Computer mit einer Ethernet-Schnittstelle implementieren. Die Terminals verbinden sich mit dem WS311 über ein Ethernet und greifen dann über den WS311 auf ein Drahtlosnetzwerk zu.
Schnittstellen und Schaltflächen des WS311 Die folgende Abbildung zeigt die Positionen der Schnittstellen und Tasten des WS311. WP S R ES PO LA ET W ER N Die folgende Tabelle listet die Funktionen der Schnittstellen und Tasten auf. Nr. 1 Beschreibung Taste WPS: Wird verwendet, um die WPS-Funktion zu aktivieren. Drücken Sie sie und halten Sie die Taste WPS des WS311 für mehr als 2 Sekunden und lassen Sie sie dann los. Drücken Sie dann innerhalb von zwei Minuten die Taste WPS des Wireless Routers.
Nr. Beschreibung 3 Stromanschluss: Wird genutzt, um den WS311 an das Netzteil anzuschließen. 4 LAN-Schnittstelle: Wird genutzt, um den WS311 mit der Ethernet-Schnittstelle an eine Set-Top-Box, Fernseher oder einen Computer zu verbinden. Anmerkung: LAN = Local Area Network (lokales Netz) WPS = Wi-Fi Geschützte Einrichtung Wi-Fi Geschützte Einrichtung, kurz WPS (Wi-Fi Protected Setup), ist ein Standard zur Vereinfachung der Sicherheitseinstellungen eines Drahtlosnetzwerks.
Nr. Name 1 Betriebsleuchte 2 Statusindikator 3 4 EthernetIndikator Indikator für Drahtlosnetz Farbe Status Beschreibung Gelb Grün On Der WS311 ist eingeschaltet. - Off Der WS311 ist ausgeschaltet. Blau On Der WS311 wurde normal gestartet. - Off Der WS311 ist nicht eingeschaltet oder der WS311 wurde nicht gestartet. Gelb Grün On Eine Ethernet-Verbindung ist eingerichtet. Gelb Grün Blinkt Durch die Ethernet-Schnittstelle werden Daten geleitet.
3 Einsatz des WS311 Sie können den WS311 über die Ethernet-Schnittstelle mit verschiedenen Geräten wie IP-STBs und Computern verbinden. Nach der Verbindung können die Geräte drahtlos mit dem Drahtlosnetzwerk in Ihrem Haus verbunden werden. In den folgenden Abschnitten werden eine IP STB und ein Computer als Beispiele verwendet, um zu beschreiben, wie die Geräte angeschlossen und der WS311 benutzt wird.
WPS 3 RESET 1 POWER LAN 2 1. IP STB 2. WS311 3. Netzteil Die Position der Ethernet-Schnittstelle auf IP STB variiert bei den verschiedenen Herstellern von IP STBs. Die Position der Ethernet-Schnittstelle auf IP STB, die Sie in der obigen Abbildung sehen, dient nur als Referenz. Schritt 3 Den WS311 einschalten. Nachdem das Netzteil des WS311 mit dem Stromnetz verbunden ist, wird der WS311 eingeschaltet und die Power-Anzeige auf dem Bedienfeld wird aktiviert.
Der Wireless-Netzwerk-Indikator leuchtet durchgehend orange. Nach 300 Sekunden wechselt die Farbe auf Grün. Wenn sich der Drahtlosnetzwerk-Indikator nach dem Blinken in Orange ausschaltet, bedeutet dies, dass der WS311 keine Verbindung zu einem Drahtlosnetzwerk herstellen konnte. Für seine Lösung siehe Abschnitt 5 „Häufig gestellte Fragen.“ Schritt 5 Stellen Sie das IP STB so ein, dass über den PPPoE DFÜ-Modus auf das Netzwerk zugegriffen wird.
4 Konfigurieren des WS311 Beim Web-basierten anmelden Konfigurationsdienstprogramm Die meisten Parameter zur Unterstützung von Netzwerkanwendungen unter normalen Bedingungen sind im WS311 standardmäßig vorkonfiguriert. Zur Anzeige des Betriebsstatus oder Änderung der Parameter des WS311 können Sie sich bei dem Web-basierten Konfigurationsdienstprogramm anmelden.
Ändern des Administratorkennworts beim Web-basierten Konfigurationsdienstprogramm Aus Sicherheitsgründen oder um ein Kennwort zu verwenden, das leicht zu merken ist, können Sie nach dem Anmelden beim Web-basierten Konfigurationsdienstprogramm das Administratorkennwort ändern. So ändern Sie das Administratorkennwort des Web-basierten Dienstprogramms: Schritt 1 Navigieren Sie zum Menüpunkt Maintenance > Account, um die Seite für das Systemmanagement anzuzeigen.
Schritt 1 Starten Sie den Browser und greifen Sie auf die Website-Adresse http://192.168.1.100zu, um die Wireless AP List anzuzeigen. Weitere Informationen finden Sie unter „Beim Web-basierten Konfigurationsdienstprogramm an.“ Der WS311 sucht nach WLAN-Signalen, bevor die Wireless AP List angezeigt wird. Die Suche nach Signalen wird einige Zeit dauern. Warten Sie, bis die Seite mit der Wireless AP List angezeigt wird.
Schritt 4 Wählen Sie das Drahtlosnetzwerk, mit dem die Verbindung hergestellt werden soll, aus der WLAN AP List aus. Schritt 5 Geben Sie im Bereich Settings die Verschlüsselungsart und das Zugriffskennwort des Drahtlosnetzwerkes ein. Schritt 6 In der unteren rechten Ecke klicken Sie auf Connect. Der WS311 speichert automatisch die Verbindungsinformationen über Drahtlosnetzwerke, mit denen er sich erfolgreich verbunden hat.
5 Häufig gestellte Fragen Wie kann ich die Standardeinstellungen für den WS311 schnell wiederherstellen? Wenn der WS311 eingeschaltet ist, drücken und halten Sie die Taste RESET länger als 6 Sekunden und lassen sie dann los. Der WS311 wird automatisch neu gestartet und die Standardeinstellungen sind wieder hergestellt.
Bereich aufzustellen. Auch wenn Funksignale durch Hindernisse hindurchgehen können, können zu viele Hindernisse wie Beton- oder Holzwände die Übertragung des Signals eines Drahtlosnetzwerks beeinträchtigen.
6 Anhang Standardeinstellungen Parameter Standardwert IP-Adresse der LAN-Schnittstelle 192.168.1.100 Subnetzmaske der LAN-Schnittstelle 255.255.255.
Elemente Drahtlosübertragungsraten Spezifikation 802.11b 1 MBit/s, 2 MBit/s, 5,5 MBit/s und 11 MBit/s 802.11g 1 MBit/s, 2 MBit/s, 5,5 MBit/s, 6 MBit/s, 11 MBit/s, 12 MBit/s, 18 MBit/s, 24 MBit/s, 36 MBit/s, 48 MBit/s und 54 MBit/s 802.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian, Longgang Shenzhen 518129 Volksrepublik China www.huawei.com Teilenummer: 202486 Für Fragen direkt zum Gerät wenden Sie sich an die folgende Hersteller-Hotline*: 05921 877 682 (* 0,03 EUR je angefangene Minute aus dem Festnetz von T-Home, die Minu-ten¬preise in anderen Festnetzen bzw. Mobilfunknetzen erfragen Sie bitte beim je¬wei¬ligen Anbieter.