P40 Pro User Guide-(ELS-NX9,EMUI12.0_01,en)

Table Of Contents
2 Open PC Manager (version 10.0 or later) on the laptop and go to My devices > Phone >
Connect. Place your phone above the keyboard and your laptop will start searching for
your phone.
To check the version of PC Manager, go to > About. To update PC Manager, go to
> Check for updates.
3 Follow the onscreen instructions to connect your phone to your laptop.
Connect Your Phone to the PC by Scanning the QR Code
1 Open PC Manager (version 10.0 or later) on your PC, go to My devices > Phone >
Connect, and select the QR code option in the upper left corner.
To check the version of PC Manager, go to > About. To update PC Manager, go to
> Check for updates.
2 Ensure that your phone is connected to the Internet and use it to scan the QR code
displayed on the PC.
3 Follow the onscreen instructions to connect your phone and PC.
Connect Your Phone to the PC with a USB Cable
1 Use a USB cable to connect your phone and PC.
2 On the PC, open PC Manager (version 10.1 or later).
To check the version of PC Manager, go to > About. To update PC Manager, go to
> Check for updates.
3 Conrm to connect to the PC on your phone.
If you cancel the connection on your phone, you can establish a wired connection
again. To do so, open PC Manager and go to My devices > Phone > Connect > Other
ways to connect > USB.
Disconnect Your Phone from Your Computer
After you have nished using Multi-screen Collaboration, you can disconnect your devices
using the following methods:
Open PC Manager on your computer and go to My devices > Phone > Disconnect.
Swipe down from the upper left edge of your phone to display the notication panel, and
touch DISCONNECT.
If your phone and computer are connected via a USB cable, remove the cable to disconnect
them.
Smart Features
40